Search results for query: *

Its a 68 satellite non AC car, the switch that broke was the one on the dash. I figured I could take the wires coming out of the box (the ones coming off the resistor?) and run them to some kind of switch

the factory fan switch broke so i need to do a new non-factory toggle type switch. Can anyone tell me how to wire the fan? There are 3 wires in the plug on the heater box. What to I need to send to them to get the various fan speeds working? Ground? Positive? Switched I'm guessing? Is it...

I've had this problem before. In my case the connector slipped off, plugging it back in fixed the issue

i have it running at 160. Initial advance at 10 degrees, I cant remember total advance. It starts at about 2000 and is worse under load

Its a pretty stock 318 with an MSD 6AL instead of points. It has a 650 4bbl, dual plane manifold and headers. I run on premium from a number of different vendors with about the same amount of ping so except for the overall decline of gas quality since 68 i dont think the fuel is tooo bad :)

Hi all, I'm looking for a cooler running plug for a 318 with stock heads. I'm trying to reduce pinging and was told that colder plugs would help. I went through the NGK site to get more info but I cant seem to find any plugs anywhere that are cooler than normal thanks! -scott

Anyone have a good source for upholstery supplies? I'm playing around with learning how to do it and I need a good source. Any leads would be appreciated -scott www.WitchCityCustoms.com

Thanks! Next up is a new console (half built so far) and a set of Hella projector/ellipsoidal headlights I got out of a BMW. The lens diameter is nearly the same, should be good :) I have a boneyard addiction :) -scott

The lap belts certainly have enough framework, once bolted in you could lift the car by them. I havent taken them apart so i dont really know how much steel is in the back, but it is really rigid. my guess is there is some steel structure that is vertical on the edge of the seat with the...

Thanks for the nice comments!

I finally got the time to put together some info on how I did this: http://www.witchcitycustoms.com/fitting-2003-cadillac-cts-power-leather-seats/ I'm slowly posting some other random stuff I'm working on here: http://www.witchcitycustoms.com/sputnik/ Hope you guys find it useful..... -scott

is this still available?

Hey sorry for the delayed reply, work has been nuts. I'm putting together some photos and info and will do a detailed post shortly. Next up is the power moon roof from a volvo cross country. I never should have moved my studio next to a bone yard :) - - - Updated - - - Yeah, I'm totally with...

Hey all, just thought I would show you a pic of my new seats. I had a bench and it was going to be stupid money me too get it reupholstered so I have been keeping my eye on the junkyard for something to put in til i figure out what I wanted. The other day a crashed caddy cts showed up with dark...

do you still have the rear springs? If so, how much do you want for them? -scott

ok, followup question: Does anyone have a good source for leaf springs? My current ones are a little soft and I seem to remember that you can get extra stiff springs to tow a trailer with less drop on the rear bumper.

yeah, thats exactly what I want to do. Is the square tube 11 gauge or so? And the flat stock that bolts to the frame looks like its about 3/8?

My daily driver is a 68 satellite 4 door and I need to add a trailer hitch. Anyone know a good source for a kit or individual parts I can get? I can drill, bolt weld, whatever, I just need the parts

this stand is genius! what a beautiful design

I'm looking for wiper arms and a headlight switch