Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I found this report in an old magazine from 1994.
https://postimg.cc/FkVb99sm][/url]
https://postimg.cc/jLv6mdF4][/url]
https://postimg.cc/kDQvNyNZ][/url]
https://postimg.cc/6yBLMGYQ][/url]
https://postimg.cc/VJ698PyQ][/url]
https://postimg.cc/2LDFRqY2][/url]...
Gents,
I´m Looking for the 1st owner of my ´67 Dodge Coronet.
Would you like to help me?
Do you have any idea to start this search?
I have no Clou to start :-(
I attached the last title of my car.
Many thanks….
Hi gents,
my 67 Coronet was delivered without a front sway bar. At now, I wanted to install a front sway bar.
I purchased a used sway bar from a 68 road runner in a yery good condition.
So, my question is, my LCA hasen´t any bracket for the sway bar application. Where I can buy a pair of...
I´m looking for the lower bearing inside of the bearing support.
I only need the bearing not the support.
Or I´m interessted in both, if the conditon is good.
The part is mounted in a 67er B Body Coronet.
Measurements:
Outer diameter: 57,7mm | 2,27"
High: 27mm | 1,06"...
Gents,
I´m Looking for this throttle cable.
Part number: IS-530 / 2843750
67 B-Body B/RB 2 and 4 bbl
Overall length: 20.5"
round application firewall.
Wish you all a very good x-mas and a happy 2015.
Hi Folks!
Due to my conversion from automatic to a 4 Speed car, I´m looking for the two housing below the steering wheel.
Can you give me an advise or a Website where I can find These parts?
Or maybe you have a used part in your Garage?
Many thanks,
Niels
Would like to say thank you to member chargercrazed for this oversea deal.
This bell housing is now in transit to Germany and will be find a new place in my 67 Coronet...
Hi folks,
i bought a used set (16ea) of 3/8" pushrods with mounted ball / cup tipps.
My question is, how to remove the ball or cup tipp of the pushrod to shorten the lenght of the main pushrod? have you guys any suggestions or some pictures for better understanding?
i can´t find any...
Hi,
hope there is anybody to can help me out.
Maybe one of you guys can give me more details about the application and the performance of the 1.5 ratio Crane GoldAlu Rockers?
How is the quality? Informations about mfg failures? Maintenance?
please tell me the advantages and disadvantages of...
European meeting in Küssnacht /Switzerland [HQ pictures]
Here some good pictures of a nice meeting in Küssnacht /Switzerland taken by Dejan (AmericanMuscle.de)
Thank U!
Hi gents, i want to install a new front sway bar in my ´67 Coronet. first i have couple of questions. what i have to keep in my mind if there wasn´t any sway bar mounted? Which kind od diameter in need? Which manufacturer you can suggest?
Thanks Niels
Hi,
i´m looking for a step by step photo documentary for an assemly of a 383 engine. cause i bought an engine it was already disassembled. hope one of you guys can help me out for an correct assembly.
Thanks, Niels
Sorry guys, i didn´t find any posting about this question.
Which kind of engine paint are you prefer?
VHT, Pentastar Color or POR15???
I need a good paint which is resistent against oil, gasoline and maybe industrial cleaner!
Hi gents,
hope anybody can help me out to find a good competent engine dealer.
i found two web pages with different services.
I looking for good 383cid or 440 cid engine with estimate 350- 390 horse power. Not a hard race engine, mostly for road/street use...