Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking at picking up a used Worth shop lift and disappointed that I cannot find anything on the internet inasmuch as an installation manual, owners manual or parts breakdown. While I found a company selling parts, it is always call with model and part for quote. No breakdown, how am I going...
NOTE NOTE NOTE....this is not your average sign....it is approx 5 foot tall and 8 foot wide and double sided lighted and panels are in good condition. The sign incorporates a center lifting point built in and mounting hook on each end. Lighting has not been tested...standard fluorescent tubes...
For sale, never used Atlas model rotisserie. Originally bought from well-known shop equipment retailer out of Atlanta. The unit is new, never used, sitting in storage and as a result is dusty. The uncoated bolts show surface rust. Item is 10 miles south of Perry GA just off I-75, easy on and...
Old ad.....saw no way to bump..
This trunk pan has a few corner dings and scrapes from poor handling and storage. This unit will take little time or effort in the hands of a body man to make ready for installation and at this price easily cut to patch your existing rusted pan if you so desire...
Hello forum, just finishing up a rebuild of a commercial alignment lift and find that I truly need an anti skid coating applied for driving on and off the lift safely if the environment outside the doors are a least bit damp/wet.
I am sure I am not the first person here to encounter said...
Anyone know the factory specs of a 65 383 4bbl camshaft in regard to advertised duration? Not interested in anything purple shaft...factory specs data only. thanks...
I have always found some of the items confusing as far as dating. I recently acquired a 383 4bbl intake, casting 2806301 and was just curious as to the date. Above the casting number is larger raised letters, 2A there is no day/night casting pointer....there is the clock data with a hump just...
This trunk pan has a few corner dings and scrapes from poor handling and storage. This unit will take little time or effort in the hands of a body man to make ready for installation and at this price easily cut to patch your existing rusted pan if you so desire. This is AMD part number...
This trunk pan has a few corner dings and scrapes from poor handling and storage but it is way better than trying to patch a rusted out pan. This unit will take little time or effort in the hands of a body man to make ready for installation. This is AMD part number 800-1466 and is sold in two...
This is not a factory bumper...this is the AMD Mopar authorized reproduction bumper part number 990-1464. Bumper has one small ding, and paper towel wipe test proves two small nibs on the unit also. While not a pristine unit, it is very much a nice piece for the money. This is listed here for...
Has anyone else had any damage on the rear cross tie? I was doing trunk pan repair when I discovered this and yes it goes into the trunk extension also.
Bit of cutting, trunk extension repair, bending of 16 gauge metal, light off the welding torch and I got it repaired....same thing but to a...
I have here a set of major brand quarter panels. I prefer to sell these as a set. They have some handling scratches and the right one has one light dink, the left one has two small dinks and one bit larger dink along the mid line...see photos. Both have some protective paint scuffing from...
looking for the trim for the nose of the hood. I have limited skills at bumping and repairing stainless so if you found a cherry for your car, I am interested in you seconds....if you can help please send PM. Thanks for your time.
Missing fuel filler tube and a hood hinge spring on a recent car purchase.....what models are compatible for fitting to the above listed vehicle so to increase my finding locally. I have only a Dodge 880 near me is why I ask. Thanks....
This stuff needs a good home...was in a car I bought. Trades for 62 Dodge trim parts welcome....PM your suggested trades. I have identified these best I could, if I am wrong on a application, my apologies, please correct me where I am wrong...not familiar with these years Plymouth
Am trying...
Needed for the right side, the rear hockey stick looking trim that connects the speed line trim to the rocker molding. Thanks in advance....please send PM....
when I removed the seats in my 62 Polara 500 I immediately noticed that there were 4 rubber plugs pushed into holes back of the front buckets. If 1+1 = 2 then to my thinking 2+2 = seat belts. How many owners here have car equipped from the factory with seat belts? I cannot find reference to...
anyone here doing their own alignment even if just to dial it in for to carry to the alignment shop? I ask because I am in the market for a wheel clamp for the caster/camber gauge and was wanting to know who has had success with what model and the method it is held to the wheel. I am thinking...
when upgrading the early b-body (62 dodge Polara in this case) is there any change in the front wheel track going from drums to disc? I know put it on and measure, I would but, I have an op to snag some upgrade parts and a short window to pass or play. Thanks...
I have a set of 500 emblems in the box of trim that was part of a package deal. While the pins do fit the holes, it seems the size of the letters are a bit large and are a bit proud of the mounting surface. Is this normal? Can someone be so kind as to give the height and length of the 500...