Search results for query: *

When putting my engine together I gave 747Mopar the ok to open up the oil opening from 3/8 to 1/2 because we understood that 1/2" pickups were available for the hemi. Ordered a hemi pickup from Milodon (showed 1/2") on the summit site but it was still 3/8" I'm trying to work with something...

Anyone in the racer section have any experience with his heads?

Has anyone done it? Doing it to their car?

Hey, I'm doing a crossmember for coil over mounts and don't have my gas tank handy. Is there anyone with access to a gas tank same as a 69 Roadrunner that would be able to give me the length dimension (Front to back) Would really appreciate it, Mike

Looking for some ideas for my plans to do sheetmetal inner fenders. Here's what I was thinking so far. Going to cut the top panel with the fender fastening locations off 2 brand new AMD inner fenders I have :) (why not right) Thinking they will taper out from close to the fender sweeping...

Thought some of you racecar guys might find this interesting. My car is a protouring build not a track build but starting out with a front DS frame rail that took a good wack we decided at my buddies shop Webber Chassis to take a different approach. We started out with a 3D scan of the entire...

The Edelbrock Victor and Pro Flo are all that come to mind for me with injector bosses for port EFI. Are there any other options I'm missing??

D1X with custom built brackets for RB block mopar. Nobody makes brackets specifically for Mopar BB. Supercharger Store comes the closest with a conversion to SBC brackets but these allow more underhood and accessory clearance ( and not using parts meant for Chevy!) The D1X is a very capable...

Just passing this on from a discussion with Bill. It's being tested now on a few cars and everyone loves it; We’ve designed a bracket that mounts a Bicknell linear balance bar to the stock firewall and put together a complete master setup around that. I’m enclosing a picture of one in a Dart...

Need a favor if someone could help me out. My car is completely apart and as I am trying to find a way to get a bit of extra clearance moving the rad forward I'm looking for the measurement between the front of the rad to the grill and maybe any pictures from that space. Also if possible a...

Does anyone know the name or where to get the spacer button that goes between the axles on a 489 case. I've lost and found mine twice already and now I think it's lost again for good. It's a Dr. Diff rear end so I'm sure I could go back to Cass just trying to see if there may be something...

A feature on New Zealand's Ian Neary and his ERUPTION build. Starts on the GTX at 15:50

At the age of 82 RIP

http://www.hotrod.com/articles/factory-plug-n-play-gen-iii-crate-hemi-engines-and-install-kits-from-mopar/?sm_id=social_aumohotrodsshub_default_20161102_67456996&adbid=10153849940387540&adbpl=fb&adbpr=13601527539

So I had my rear end blasted (My rear end sure feels blasted anyways!!) and this was a surprise being able to look at it all cleaned up! I'm going to scrap this and we will build a sheet metal rear end. Since we will have all of the template if anyone is considering sheet metal rear for a 8...

Looking to see if any body possibly bought Torque Boxes for the 1966 - 1970 Mopar B Bodies and never got around to using them. Let me know if anyone has a full set they would part with. US Cartool or the like Thanks! Goon

Looking at Sweet5ltr's car got me curious about the benefits/downsides or rear mounting the turbos. Tried to do some reading and of course most available information is kits for imports and reviews and the odd pickup but with our cars and the big blocks. I assume clearance is an issue for...

Looking for replacement shock tower for my 69 Roadrunner. Mine was bent/twisted in a previous collision and just realized it was the culprit in not being able to obtain any positive caster. Primarily looking for DS but will buy both if available. Let me know if you have a nice straight one...

Looking for a good source for inner fenders for a 69 Roadrunner. Just had a pair show up from Rock Auto (American made not Taiwanese) and they are absolute junk

Thought this was a good read http://lateral-g.net/top-three-mistakes-when-building-a-pro-touring-car/