Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 1973 roadrunner with a 400 cu in motor and a Saginaw power steering pump.
When I try to turn to the right it is very hard until I get going. When I back up,
it is very hard to turn to the right and then it gets hard to turn the wheel back and try to straighten out.
Changed out ps pump...
When I installed the K member about a year ago, I changed out my 40+ year old rubber insulators with poly ones. The kit came with shims but, I really didn't know what they were for so I didn't use them. My manual on pages 2-27,28 says to use the correct number and thickness of shims to correct...
idle speed/stop solenoid for any AC car
I have a '73 RR 400 and '70 Cuda 440 that have A/C installed.
I am having problems with low idle speedwhen at a stop and the A/C is turned on.
Can someone tell me if these cars had an idle stop solenoid for controlling the fast
idle for any of these...
Did I miss something when reading how to tighten the strut rod nuts when replacing the bushings?
I just replaced worn out strut rod bushings and the ones I purchased did not exactly look like the old ones (naturally).
Anyway I tightened the nut to 52 ft lbs but the nut seemed to go farther on...
I was taking apart my windshield wiper system on my 73 RR cause the right wiper was not rotating all
the way and in doing so I broke two of the plastic pivot parts that hold the wiper arms to the left
wiper blade mechanism. Does anyone know where I can get these parts? Here are some pictures.
Anyone know where one can purchase a rear main rope seal these days for the 73 400 cubic inch
engine? Been looking everywhere. Must not be looking in the right places....
Thanks in advance.
I am wondering if I really need this windage tray when I put my oil pan on this 73 RR 400 CID?
I will not be racing this car. Will there be a clearance issue if I don't use it?
I have the old "oil pan leak" like others do for not as long as others, but am trying like you all to fix the...
I have a 73 RR with a 400 and 4 speed...and I have been looking at a puddle of engine oil under the car wherever I stop and put the car away for the night.
I changed oil and filter about 300 miles ago and saw nothing unusual about the oil. Cut open the filter and it looked good.
I could...
I am looking for a new clutch assembly. Mine is slipping and does not grab cleanly from a stop.
Can anyone direct me to where I can purchase a cover and pressure plate assembly w/clutch disc for a
1973 Road Runner?
It should be an 11" for a 4 speed 23 spline 1"
Thanks in advance.
Well, I will be installing my roof rails and would like help on what goes first, second, third etc. in order to install them.
I have two types of tape, a grey one that has sticky tape on one side, a black one that also has sticky tape on one side, the roof rail itself and of course the roof...
I have a problem and maybe the Plymouth guru's can help. Does anyone reproduce NON rollup quarter
glass for a 1973 Road Runner. I just received my quarter glass from CI and they are for quarter glass in a rollup hardtop.
I have a NON rollup RR. Or, can I use the bigger windows, just place...
I have a manual window regulator form a 72 RR. The square ends and roller needs to be replaced as seen by the pictures.
How do they come off and where can I purchase replacements?
Thanks in advance.
Experts, I have tried myself to make this piece look better, but I don't have the skills as some of you do. Can someone tell me how to
straighten this lower metal grill piece out and get rid of all the pit marks? Or, where do I get a new one, or who can I call to get it refurbished? Any help...
Here is my fender tag. I read on other threads that one could tell what rear end was placed in a car just by decoding the fender tag. I did that already, but I could not find what rear end of ratio gears I have. No tag on diff or anywhere else on car. I have a 73 RR with 400 cu. in and 4 speed...
graphic express stripe kit
Has any one dealt with any graphic express stripe kits? If so, how close to original did they look, how did they fit? Did you have any problems with anything about them or the product? Thanks in advance. OR whose did you buy and did you like it?