Search results for query: *

I'm definently impressed by the trickflows. I run the 270s, they're a max wedge type head. Flow great right out of the box and are pretty reasonably priced.

I'm running a 512 in a 66 Coronet. 12.4 compression, hughes 268/272 solid cam, hughes 1.6 rockers, trick flow 270 heads, Super victor intake and a small 850 carb. 2in TTI headers, 3in exhaust. Ran a 10.46 at 129 first day out. Use pump gas for street and mix 110 50/50 at track. Very steetable...

Just to update this post, we did install a mini starter and it fires up. I know of several mopars that the msd works fine with stock starter, unsure why this one is different. The original starter seemed to turn over normal speed.

Nice

Tiger meat (raw bull meat with onion and garlic) on saltine crackers. Its a North Dakota thing

Its been too cold to work on it lately. We did hook heavy red and switched red directly to battery. And also hooked ground directly to battery. I haven't tried grounding the white wire yet. I will try that when it warms up. Thanks again!

Thanks for the replies! Cranking voltage is about 11 volts, checked for voltage to module during cranking, battery voltage. Checked for voltage to positive coil during cranking, ok, no pulse on negative side. When I pull distributor and spin it, it won't spark when I turn at slower speed, which...

Nothing, I think we'll install a mini starter and see if,that works. I'll update post when fixed.

A friend of mine switched to a 6al and has no spark. If we pull the distributor and spin it by hand it makes spark. We have double checked everything and even swapped out module and distributor out of my 440. This is a high compression hemi with stock starter. My 440has a mini starter I'm...

I'm curious why. Mine seem to transmit a lot of engine vibration.

I used a comp camXE268H in a low compression 440 worked well. I used a whiplash in a low compression 400. It made ok power but idle quality sucked and didn't make enough vacuum for power brakes.

No they're different. Bryan

Front seat covers for 66 Coronet bucket seats, black. Legendary Interiors. Never been installed. Make reasonable offer.

An engine bay painted black is a deal breaker for me. I just seen a dart that was painted under hood with bed liner.

A speedometer pinion housing from an older transmission and a pioneer speedo cable pn ca-3002 is what I used.

I installed a street demon on my 400 this weekend. Throttle response and driveability is awesome. It did take some tuning though. Now if I can get the darn choke to work right.....

Hey guys, working on a 77 Cordoba. Changed rear gear from a 2.45 to a 3.73. Speedometer reads 95 when going 60mph. I need to change speedo gear, but I have the one with the plastic housing. Does anybody know a source for these, or do I need to convert it to older style. Thanks in advance, Bryan

Nice ride. Wish I would of kept my poly!

The straps are the same. The sender mounting on the c21a is at a slightly different angle so it is necessary to bend the pickup tube and float down. Hopefully it will read full when I full it.

I'm going to order a CR21A tank for my 77 Cordoba. Will the existing fuel sender work in the smaller tank? If not does anyone no the part number to the correct one. Thanks, Bryan