Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Parting out a small block super bee
Doors are solid:$350 ea., fenders are nice not perfect but nice: $250 ea.,
Hood nice with minimal rust:$1300, hood center section: $350. Partially built stroker 340 inquire:$1500
Please inquire about the above listed items or any other item concerning their...
Dash hArness complete, one wire cut(buzzer wire) cracked putter case? Note picture. Came out of a 1974 charger se brougham a/c car. Any questions please ask
$250
33495
Zip code 34953
1971-74 original dash wiring harness.
Was removed from an; 1974 charger se Brougham. There are a few cut wires but no major ones:1 cut I believe is the door buzzer and the other is cut on the other end of the connector so I believe that one is not on the harness, Note the one of...
Used for parts or restore.
Removed from a 1974 charger se brougham
cat had cruise control and still has CC stick on column.
Located P.S.L., Florida 34953
$40 s&h or you can p/u.
Thanks.
1971 super bee roller.
For restoration or parts.
Car is completely disassembled.This is a rolling shell with no motor or transmission, has 8 3/4 3:23 open
Serious enquirers only, this car is very Rare and is one of 35 known to exist, and is registered in the registry as the only 1971 340 super...
Side marker lights which were removed from a 68 Plymouth fury. Lenses have spider cracks, superficial scratches and one had a missing plug end. P.s.l, Florida 34953
$15 s&h
For sale is an: 1971 340 magnum.
Motor is partially built. Machine work is complete with a .30 over bore and all other machining. Installed is a SCAT 4’ crank and bearings installed(new)
Brass freeze plugs install, cam bearing installed; comes with NIB KB hypereutectic pistons, SCAT Rods with...
motor needs build complete: currently 30 over all machine work complete.
Cam& rod bearings installed; comes with scat rods, scat stroker crank which is installed; ring& gasket set. KB domed pistons. Oil p/u extension all are NIB Brass freeze plugs installed Motor was being built following an...
For sale: a pair of bare factory 340 "J" heads which came off of an 340 magnum motor that was removed from a 71 challenger r/t $275.00 OBO. I have all of the other parts of the heads from disassembly if someone want to buy those as well???
Thanks.
This harness was removed from a 1974 dodge charger SE brougham it was from a rally gauge cluster w/out clock or tach. the car has GBox light door buzzers the works. there are only a few wires that are cut I know one is a door buzzer ground but the others I am not sure of you can zoom the pics a...
This unit was removed from a 1971 charger. 150 mph, gas, water temp, Alt., oil pressure. attached is the A/C controls as well, it is missing the knobs on the a/c piece and is missing one of the lights/windshield wiper knobs.
The bezel is complete with no cuts although it has a few cracks which...
Completely disassembled, pictures prior to dissemble can be seen at:http://www.71superbee.com/Michael_Henzel/#pop01
Car breaks down as follows: 1971 340 magnum car, Roller(missing original engine and trans) but comes with a date coded 71, 340 which all machine work on the block has been done...
The picture is self explanatory if you know your mopar.
$250.00 buyer pays shipping if need be.
I was going to convert my 1971 super bee to 4 spd but now decided to part out due to rust in places that I can't fix. I have been looking for a rust free donor shell, which I don't need the doors...
!971 340 mag
block has been bored 30 over, all needed machine work to block is done, SCAT 4.00 inch crank installed, freese plugs installed, cam bearings installed, motor is internally balanced, come with KB pistons,SCAT I beam rods with rod bearings installed, piston ring set, rebuild gasket...