Search results for query: *

These rivets hold the clips in place on the underside of the air cleaner. I have been unable to find them at any of the hardware stores in the SF East Bay. I found the correct air cleaner for my 72 Plymouth SSP, but it didn't come with the clips so I'm moving them from the dual snorkel air...

What is correct OEM for 1972 Plymouth SSP to secure the hose between the air cleaner body and the air breather on the valve cover? The engine is a 400 CID and I am converting back to the original 2 barrel but all of the clamps are gone. Is the born on date important when determining the correct...

I am working on restoring my 1927 Plymouth SSP. I am searching for this short piece of molding circled in the attached picture below. I need two. The mopar part number is 3680672 - 1/4 panel molding - and is an extension of the door molding. These came in white and black, but I am looking for...

1972 Plymouth RR/Satellite tail lenses Shipping from Hayward CA 94541 $150 for the pair plus shipping (firm) These are not show quality but are still in good shape and can be possibly be restored. There are fissures in the clear backup lens of one (right) and are currently painted silver gray...

B/RB Intake Manifold Casting Number 3830949-2 from 75-76 440 4bbl Shipping from Hayward, CA 94541 $50 plus shipping Paypal This was in the the trunk of the car when we purchased the 1972 Plymouth SSP. It appears a prior owner was going to use it on the four barrel carb conversion and then...

KICK DOWN LINKAGE SET Shipping from Hayward CA 54541 $75 plus shipping (firm) - complete set as pictured This is a kick down linkage that was used on a 1972 400 CID Satellite SSP after it was converted to a four barrel. We converted back to the 2 barrel set up the car was born with. It worked...

1969 Plymouth Barracuda wiring diagram This full color diagram is one page that is laminated in heavy plastic for durability and to prevent grease smudges. I accidentally ordered the wrong part number from Classic Industries. My loss, your gain. Mailing from Hayward, CA 94541 $10 plus shipping...

Carburetor, Performer, 600 cfm, 4-Barrel, Square Bore, Electric Choke, Single Inlet Shipping from Hayward, CA 94541 $125 plus shipping (firm) Paypal This was on the car when purchased and the seller claims he rebuilt it prior to selling.... Operated less than 20 miles prior to converting back to...

Edelbrock Performer 383/400 2186 Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore, Mopar, fits 361, 383 & 400 CID Shipping from Hayward CA 94541 $100 plus shipping (firm) Paypal

I am searching for this short piece of molding circled in the attached picture. Actually, I need two. The part number is 3680672 1/4 panel molding and is an extension of the door molding. these came in white and black, but I am looking for black. Please contact me if you have a pair you are not...

Needed for the driver side front fender as pictured above. Does anyone have one sitting on a shelf or know where one can be located?

I bought this to replace rubber hose PO installed on 1972 SSP with 400 CID and Holley 2bbl. The line doesn't fit my application, so I need to sell it. I paid $18 in May. I take Paypal, or MO. No pers checks - sorry.

Needed for CA requirements as we must display plates on front and rear of vehicle - if your state doesn't require a front license plate and you're not using the bracket to display any other plates, please PM me. with a price and method of payment.

Over the weekend I was looking at a photo of my fender tag and noticed that there was something attached. I recently read that the metal tag attached to a fender tag means the car had a special order attached to it. this one has four numbers stamped in it 1234. there are two parts stamped out...

Please PM and let me know if you have one lying around. This was used on 1972 models and the one in the SSP I recently purchased had a fitting on the cap broken. I'm unable to find the canister via any of the restoration sites.

I was wondering if anyone knows the Mopar part number for the fuel line that goes from the carb to the pump. The original fuel line on my SSP with 400 cid was removed, i assume, when the prior owner switched to an Edelbrock 4 barrel carb and intake. I have reinstalled the original intake and 2...

These were acquired earlier this year on a 1972 Plymouth Satellite Sebring Plus with a 400 cid motor. I am selling because I am replacing the manifold to the original along with the Holley 2 bbl. The car ran, but drank any gas that was put in it. If you are interested, please let me know. I...

Hi there everyone, I am switching out the intake manifold on the 1972 SSP with the 400 CID and can't seem to find the answer to this. We have removed the Edelbrock 4 bbl / manifold and we're going to replace with stock intake and rebuilt carb. Should we also change the valley pan/and valley pan...

I was just wondering where to look to verify what the numbers on a 2 barrel carb for the 400 cid engine in a 1972 Plymouth SSP. I think I found one and the seller claims the numbers are matching for my car. Can anyone help me verify his claim? does anyone have pictures of what the carb should...

Needed to ship Elderbrock manifold and carb listed on the for sale forum. Does anyone have one lying around that they are not using or know a a good source? Trish