Search results for query: *

Hi I have finished my car, but would really like to have 2 nice 1/4 glass for 69 Roadrunner, hardtop. I have mine installed however they have scratches. It looks like they were hit with a sander during previous paint work. I want 2 really nice glass if anyone has. I considered buying aftermarket...

Hey guys am I missing something here on the bottom of the bumper, the hole doesnt line up with anything and the bumper is bolted on fine.The blot goes in on the black bumper bracket but not the chrome bumper its self. Tks for any help

Hi looking for some input on what power wire some of you have used for the power source for classic auto air on a 69 bbody. Is says 12v source, i'm guessing you would not use the original heater wire from the under dash harness?

Hey does any body know if there is a trick to install the dash switch panel. I'm trying to prefit before I dye the lower pad. I was trying to install from the front. I wonder us it that the pad has shrunk up over the years?

Has anybody gotten the air grabber to work on a 69 roadrunner with a 440 and a ofenhausor 360 intake? Or should I just get a stock intake casting 2806178? Thanks for the help, I’m just trying to get it all to work and look proper

Hi I'm building a 69 roadrunner, I have the engine installed, it had a offenhauser 360 intake, holly 4160 carb and I'm planning on using a air grabber. First off cant get the correct cable angle for the throttle, I'm thinking I may need a holly 20 - 7 adapter, and I was also wondering if my...

Im about to purchase magnum 500’s from year one for my 69 roadrunner. Looking at 15 x 7 up front and 15 x 8 in the rear with 235 60 15 in the front and 275 60 15 in the rear. Has anyone used these wheels from year one? Wondering if there were any issues and wondering if anyone else is running...

Id just like you all to know of the great service I received from Wild Cat Auto Wrecking in Sandy, Oregon. I purchased a used power steering kit from them (pump, box, shaft and pulley) about 5 years ago, I’m only now building the car, they had the conversion sent to Feel Firm to be rebuild and...

wondering if anyone else had issues with the install of classic auto air, with the fan hitting off the compressor. The engine is a 440 in a 69 roadrunner. The water pump spacer is 1 3/8” and the supplied spacer with the kit is 3/8 “. The other issue I’m having is the compressor is on top of the...

Does anyone know the correct size power steering belt. It's a 1969 440. Without factory air conditioning. The belt will route from the power steering to the crank pulley. Napa gave me a 44 inch belt, but much too long.

has anyone urethane paint on their engine block or other single stage paints? I'm looking to use a paint that is higher quality than spray can. I use urethane often, just unsure how it holds up to the heat of a engine. It appears on graveyard cars that they use expoy primer and then single stage.

does anyone which negative battery cable is correct for a 69 roadrunner without a/c; 23 or 25 inch? As well should there be a ground wire grounding the body? Thanks

hey guys, just wondering if anyone knows if a 69 roadrunner is supposed to have a reverse light around the dash area? The guy rebuilding my wiper motor is wondering because apparently there is extra wiring in the wiper motor for a 4 speed with a in cab reverse light. The wiper motor I sent him...

I've blasted, primed and painted all my front end parts. I'm unsure of the correct color of the upper control arms, sway bar and strut rods. I though black was correct, so I painted them , now I'm unsure. The more I look it seems dodge are black and Plymouth are a cast color. Not sure if that...

im getting ready to do the rad support blackout on my 69 roadrunner. Can someone tell me if the pic of the yellow car is correct. My car is the red pic. Is it correct to not black out the top support bar? Thanks in advance

i have already bought a set of energy suspension poly urethane bushings for my 69 rr entire front end. Some local guys ( not mopar guys) have warned me that those bushings tend to squeak bad and ride rough. Just looking for advice if I should not use the kit and go with something like moog ? Thanks

how can I move my thread from general discussion to members restorations?

hey guys, Does anyone know if the Pittman arm below is correct for a 69 roadrunner with power steering? It is what Napa has listed, it does fit the spline. But I have a spare steering box which has a different arm. Thanks

what is everyone finding as the best complete exhaust system to purchase? I have a 440 with hp manifolds. I want something that has a nice sound but not too much drone in the car. I've looked at tti and accurate, both look good but a little pricy. Thanks any recommendations would be appreciated

Hi Just wondering if anybody has a pic or some measurements on the locations of the vinyl top chrome trim ( holes for the clips on the quarters) as well and the clips for the rear glass trim in the dutchman panel area. Mainly i'm wondering about the locations and spacing Thanks