Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I screwed up somewhere. I don't know if the electronic ignition was working when I bought it, but I could not seem to get it to work for love and or money. I've now tried going back to points. But I cannot seem to get the car running. I can get it to run for maybe 20-30 seconds sputtering...
Well, my experiment with the Orange box / electronic ignition hasn't worked out so well. We've got the car running, but I cannot seem to set the timing for love nor money. I'm currently left with two options. One reinstall the original points ignition. I would probably just do a rebuild of the...
I have developed a recent issue with Vapor lock. It seems the local Government thought it would be a good Idea to mandate a minimum amount of Ethanol in local gasoline. Unfortunately we have been experiencing a number of very hot/humid days, and I keep stalling in traffic. I've watched a bunch...
Hello,
I'm looking for a Diagram to help me install an Orange Box (P4120505 ignition module) and Electronic Distributor. I received them in a parts swap, so I don't know where a couple wires hook up. Anyone able to help?
Thank you in advance
My son and daughter were playing in my car when one of them jostled the steering column gear shift. It popped out of Park and started rolling down the driveway backwards. Thankfully my Son slammed on the brakes when I yelled at him otherwise the car would have been nesting in the trunk of the...
I took my car in for an issue in the front end / noise over bumps, and the shop lifted my car performed an inspection and lubed my suspension. I guess the last place I went to did not lube it. However upon inspection they also advised me that my lower control arm bushings need to be replaced...
Help. My wipers have not been parking correctly for quite some time. I've got a 1971 Plymouth Satellite, with two speed wipers. I had to turn it off mid wipe when it was at its lowest point to keep it from obscuring the windshield after clearing my windows. But now my driver side wiper arm has...
I have a 1971 Plymouth Satellite with the factory 318. I have received a Holley 650 ultra double pumper part number 76650 BL which if I can make it work reliably I would like to use on my setup. I also have a four barrel intake from what I believe is a police interceptor 360 part number...
I just purchased some 5 Spoke American Racing rims from a friend. I was very excited because I've wanted some for quite a while. The fronts are straight replacements but the rears are a little big. They are 255/60/15. I tried putting them on but they will interfere with the fender lip the moment...
I was unable to make the show because of work, and luckily it was rained out. If you are on Face Book, please vote for my Car
You Can vote on this Thread, just look for my car.
Thank you
I had a pretty good day at work. Shined up my ride pn my coffee break. Got home by 3pm. Laid down for a 20 min nap when the door bell rang. An elderly meighbor was saying something about touching my car. I wasn't sure what he meant. I go out to find he backed into my left rear quarter panel...
I just received a van from my father in law and it has numerous paint chips from travelling up and down his 1 mile of his gravel road over the years. Most chips have not rusted but the paint has separated about the size of a quarter. I also have a number of rust spots which are all surface in...
I cracked the tip of my Go-wing. The tophalf is snap clean through, the bottom is cracked behind the mount and the bottom front is ok.u Any tips on repairing it? It appears to be aftermarket. I'll post pics later
I ordered some Leaf Springs from Summit last year, and I would like to install them this year. My car has highway gears, 2.76 I believe (I don't have access to the fender tag right now). I would like to have a sure grip axle. I have a 1971 Plymouth Satellite. I am beefing up the engine &...
I had no temp or fuel gauge reading so I went to replace the voltage regulator and to my surprise it wasn't even there. I have put in a new unit. What hooks up to it on the top blade?
There was a guy selling Resin cast copies which would be fine for me as my car is a tribute and not original, however I did not move fast enough and now he can't be found anywhere. I have a hard time paying $100 + for one of these. I can restore a faded one too. Please let me know what you...
I have a spare 318 that I want to build into a stroker. I am leaning towards a 390. I have a few items that I have purchased or had given to me. I received a Proform Extruded Aluminum Roller Rocker Arm - 1.5 Ratio, a Small block 727 Transmission with high stall torque converter and a Holley 650...
I would like to order some replacement brake parts on my car, but I'm not sure How I determine the sizes I need. I have 14" wheels. I'm looking at front and rear drums and associated parts, shoes, return springs etc.
I'd love to put discs on, but that's not gonna happen for a while. :(