Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello All, my 72 Charger with 360/904 started life as a 318/904 column car. I went with a B&M Quick Silver shifter back in the day and used their "selector lever" on the transmission.
Fast forward 30 years and I just realized today that my setup is not stock; as I am converting to the floor...
Hi All, just wondering how the spring is connected, I am hoping for a close-up actual picture. If anyone has one to share it would be great.
Thanks in advance.
Pictured above are panels from a 73/74 Brougham SE, sold to me as '72's. Came to realize that 72's are a bit taller, so the 73/74's do not fit.
So I am looking for a pair in white in Good+ condition for a 72. If you do have other colors let me know and I will keep in mind.
PS - I am in Canada...
Hey everyone, just installing my carpet in my 72 Charger, moved from column shift to Slap Stik.
Not sure how to cut or not cut the carpet for the Torque Shaft Assembly (orange arrow) that comes from the transmission and attaches under the console.
Does anyone have a picture with the console...
Hello All,
Not really sure what was holding the chrome trim on, I seem to have a picture with a clip on the door.
Not sure if my pictured clip is correct, what screws were used? Any help is appreciated.
So here is the molding.
Picture of a clip that was there when I removed the trim...
Hello All, need some help; I'm wanting to install the engine and transmission together. Previous setup was a 318 & 904 transmission, now I have a 360 &904.
Not sure how the 360 & 904 mount. I have all the hardware, should I have the flex plate attached to the trans as shown? Also what I have...
I know where the hole is for the hose(s) to go on a non-a/c car but where should I make a whole on my firewall?
Mine is a 72 that did not come with the Ramcharger setup but did come with A/C, here is my firewall.
Any suggestions would be helpful, want to do this before I drop the engine in...
Hey All, does the package tray sit over the edge of the sail panel or is it the other way around?
I can't remember and can't find a picture. I don't want to keep playing around with the sail panels and scratch them up.
Actually in this picture it looks like the sail panel is above the package...
Hi All, I may have this clip(s) but I am not sure. The parts book gives it the part number of 2207919 and screw 9426241.
The first picture shows the two holes, second picture gives a better idea of the location.
Does anyone know what the clip looks like? I think I had it but my picture has it...
Thought this was covered in the photos I took...
I am putting the dash back in the car with hopes of installing the windshield tomorrow.
Can anyone tell me or show me where the cable goes through the firewall, from either the interior or the engine bay.
Any help would be really appreciated...
I need to transfer the Charger SE emblem and vents from insert #3502009 to #3502008 (three inserts) as my car is A/C optioned.
1. Is there a way to remove the little metal holders that hold the three plastic pins on the back of the emblem? I may just leave them as is and not switch emblems...
Hello All, I previously was running an almost stock 318, with no fan shroud and was using 6 blade 17.5 inch flex fan. It is originally an A/C car but all the A/C stuff is gone.
Just got my stock 26' radiator restored by Glen-ray, went with the 3-row max cooling option.
Need help deciding what...
I'm stumped, didn't take nearly enough disassembly photos of the car. I'm pretty sure I have the fuel line hooked up but am not sure of the routing of the vapor return line.
I have the FSM and reference guides etc, but I need actual photos to understand.
This is the fuel line from my car...
Was watching an episode of Nick's Garage;
Charger 500 Dashboard Installed and saw a nice tip about Chrysler using a hook back in the day to hold the dashboard.
With the two outer anchor bolts loosley installed you place the built up dashframe in them and secure the top with the hook. This...
Looking for this ribbed hose that's part of the heating system (heater box to dash heater control), has part number 3431470 (31206) on the grommet. I guess it was also on 70 - 74 E-bodies as well. They make the repros for '70 b-body.
Any help would be appreciated, thanks.
Hey everyone, I am looking for a pair of these for my 72 Charger SE, not sure what they are called but if anyone knows where I can get these it would be great. As far as I know my car never had them.
I have seen them for other years but they seem to be rubber, these look plastic.
Anyway if...
Hey everyone, I am looking for a pair of these for my 72 Charger SE, not sure what they are called but if anyone knows where I can get these it would be great. As far as I know my car never had them.
I have seen them for other years but they seem to be rubber, these look plastic.
Anyway if...
There are 4 screws that secure the actuator bracket to the underside of the hood.
I am piecing together my ramcharger setup and am not sure what to use. Any help would be appreciated. Not my pic.
Just received my 92lb box of TTI Exhaust, delivered to my door from UPS.
I ordered the system through National Moparts here in Ontario Canada who are distributors.
Ordered July 24th and arrived August 11th.
So here are some pics.
However the one thing is that I ordered my tips back in...