Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FWIW, here’s mine. I did it myself. !/2” pex non oxygen barrier (oxygen barrier or not, depends on boiler type/construction/material) clipped to 6”x6” mesh, on 12” centers, with each loop about 200’. Works perfect. It sits on 2” foam with plastic sheeting as a moisture barrier under that. The 5”...
Krazy Ken, Love your green road runner! I kind'a like that white stripe on the side too. It fits the car. Thanks for posting pics of your car. That green and green interior isn't very common. I like it!
Piston “Zero Deck Height” for big blocks (not RBs) would be 1.932”. I was curious about the positive deck height on 1968 383 HP (road runner) engines. I own one and a 1969. But, have not had the ’68 apart. I have 906 heads and standard size 383 pistons. The standard size 383 pistons do not fit...
Mopars on the Mississippi - Show and Swap, Sunday August 26, 2018
Annual Mopar event at the Dubuque Iowa fairgrounds.
Contact Rick Campbell at 815-594-2410 or [email protected]
I’m not sure there is a solution. But there are things we can do to help prevent this. Wayne LaPierre with the NRA gave an excellent speech a few days ago broadcast by ABC that outlined many things that could be done to help prevent this type of thing. You should go back and watch it. The...
What’s your solution? Playing the blame game and running around blaming guns, the NRA, the republicans, and screaming “more guns isn’t the solution” is NOT a solution. None of that is rational or analytical thought. It is hate speech. It is hate mongering. It is nothing more than trying to turn...
Anyone running around blaming the NRA or the republicans for what some sicko did is just filled with blind hate and rage and has no real solution to stop this type of behavior.
OK, that sounds more like the spring collar inside the crank seal. Your new crank seal should have one inside. If not, then the seal design doesn't need one? In other words it is part of the crank seal as far as I know. I'd have to look at one again to refresh my memory.
Can a 400 cast crank be neutral balanced by reducing the bob weight? In other words, Can the external balance (cast crank vibration dampener and torque converter weights) weights be eliminated by using lighter pistons, pins, rods, etc. to bring it to neutral balance? If so, what is the bob...
HT413,
As a check, try replacing your tail light bulbs or just remove them to see if the problem goes away. If one of the filaments in the dual filament bulb is touching the other it will act like what you are describing.