Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have been considering ordering the new Holley Retrobright LED headlights after hearing great reviews. The problem is they are crazy expensive ($186/each and I need 4). So I ordered and installed a relay kit from @Crackedback along with Sylvania Xtravision headlights. I had done this previously...
Looking for some help…I took my car in for alignment and they could not do anything because the frame is resting on the “ear” of the driver side LCA. I also noticed the LCA shaft only has 1-1.5 threads out past the nut from the k member. The passenger side LCA is fine with 4ish threads on the...
The 383 in my Charger ate up my v-belt. In looking closer I realized the power steering pump pulley is about 1/4” off from the water pump and crank pulleys. Vintage Air was installed by the PO and I’m not sure if that is why there is a L shaped mounting bracket (homemade?) for the power steering...
I recently picked up this 1968 Charger. It is an XP H code car with a numbers matching 383 and 727. The engine has been stroked to 496 ci with 505 hp and 606 tq. The car has the buildsheet, fender tag, certicard, original window sticker and title, and a lot of receipts from the original owner. A...
My recently acquired Charger has a beautiful set of TTI headers and a Pypes x-pipe exhaust. The x-pipe has 8 clamps around the different pieces that fit together. Also, the receiving pipe has a horizontal slit to allow for the pipe to slide in. All of these clamped areas are leaking. I checked...
I've been on here for a while and have owned a few b and e bodies, but this is my first '69 RR. I've been looking for a K2 4 spd car for a while and was lucky enough to pick this one up from Columbus, OH. Numbers 833, 383 is from another '69 RR,
late Lynch Rd build. Not perfect but a nice...
Looking for a set of Cragar SS wheels, ideally pair of 15x7 and a pair of 15x8. Do not need to be show quality. Must be able to ship to Denver. Let me know if you have anything close.
Thought I would start a thread of us driving around in our cars. I just posted this one of the past summer driving around the Colorado Mountains in my '69 Sport Satellite Convertible.
Anyone know why 2 of these have extra holes and what they are for? Can anyone confirm the numbers are 15x7 and 15x8? Also will this set hold Dodge caps or are they a missed matched set with the extra bump on the front?
Thanks for your help!
I picked up this '69 Satellite vert and am curious when production stopped for this model year and if this could be one of the last built? Also, does anyone know what the "19" in the top right means and little "u" punched out? Thanks!
Selling my 340 with 6 barrel set up. Included is a correct steel air cleaner, 1970 block, manifolds, O heads, 6 barrel Holley carbs/linkage and Edelbrock intake manifold, alternator, distributor, pulleys, power steering pump. This is a drop in and go complete set up.
$3800
Found a car that caught my eye but not up on value of these Belvedere's. RH27E VIN, originally 318 now 440 RV motor with new heads and warmed cam, pwr brakes/steering, restored 6 yrs ago with patched qtr and new trunk pan, new legendary interior. Only reported issues top is good but shows some...
Thank you goes out to Cody Cole for doing this write up on my '70 Barracuda and '68 Charger.
Check it out!
http://moparconnectionmagazine.com/polar-opposites-attract-dan-frazzinis-1968-charger-1970-cuda/
I am looking to buy a set of Weld ProStars for my '68 Charger. They only offer 5.5 or 4.5 bs. I want to run a 29x12 or 30x12 tire, and heard a 5.5 bs rubs the springs. Is anyone running a set up close to this and can tell me if this would fit?