Search results for query: *

Recently bought an AC vent for my Charger from Mopar Parts Giant and received the wrong part. Went online to get an RMA and was informed that the pictures are for reference only and I would have ot pay a 20% restocking fee and pay for return shipping when I received the wrong part. The lady...

I originally posted this in the wrong area. I know it isn't a suregrip by spinning the wheels but not sure which rear end it is. it came from a 1972 Plymouth Satellite

Can someone help me identify this rear end? Thought is was an 8 3/4 but having 2nd thoughts. I know it isn't a sure grip by spinning the tires but not sure which one it is.

Cleaning out all my old parts and found these cables and not sure what they are. never seen them on a 72 Roadrunner but the have grommets and were with the rest of my parts.

My restoration started with the original 72 GTX Roadrunner , then I bought a 72 Satellite loaner car. started out with 2 complete cars then ended up buying NOS and other parts and still have a bunch of parts. I don't have an extra 72 Grill laying around but I have wiring harnesses, lights...

The brake lights and turn signals in my 72 Roadrunner work as expected with and without my head lights / tail lights turned on. The issue I’m having is my tail lights are brighter than the turn and brake lights so you can’t notice them blinking at night when the tail lights are on. You can...

finally got the 92 GTX RR on the road and after 500+ miles I decided to rotate (re index?) my torsion bars because I had them adjusted all the way and the car was still about an 1" to high. I wanted the screw adjustment to be in the middle and not max. During the initial restoration I replaces...

I'm trying to figure out where I should connect the AC vent control vacuum line on my 440. I also need to know where the vacuum line goes through the firewall. The AC is one of the final parts of my 5 year restoration project

I need the clip that holds the plastic wiper linkage bushing to the wiper motor arm. I have the rubber boot and the plastic piece but it appears I've misplaced the clip that holds it on the arm. Its the round clip with the center tab that slides over the tit on the larger piece

I’d never built an engine before so I bought a book and marked another item off the bucket list. Following the 1st 50 miles with Royal Purple break in oil I removed the filter and drained it and then cut it open. Pored the contents into magnetic trays to see what it was catching. Based on the...

I've read many threads and a lot of web searching and I'm having a hard time finding a direct answer. I have a 72 Roadrunner with a 440, Eldebrock Performed RPM intake and a Holley 750 carb and as you can imagine I have very little hood clearance. I'm ready to buy a low profile air cleaner...

Looking for the bracket that mounts to the 727 transmission and holds the z-bar for the column shift linkage. it is listed as Bracket 19-48-46 in the attached picture

After a long few years my 72 GTX is getting very close to being finished and I'm down to the last few components. In an attempt to get as close to original as my capabilities will allow I'm trying to use the correct hardware whenever possible. I'm ready to install the heater control valve...

Does anyone have any experience with the aftermarket tail light lenses that are sold by Classic Industries. They are somewhat expensive but about half the price of some of the NOS ones you can find on line. Mine are OK but they have room for improvement.

Still working on the 72 RR GTX restoration and I'm not sure what type of mirror was originally used on a single side mirror car. I'm not sure if the one that was on the car when I bought it is the right one. I know the car did come with a single manual side mirror.

finishing up my garage and I'm looking for 4 or 5 old connecting rods and pistons that I can make into door handles. My buddy is a machinist and he has volunteered to make me some adapters. Cold be a really cool project or they could end up in the trash.

I've installed the parking brake cable and successfully installed a new grommet where the cable exits the interior through the firewall under the front fender (top arrow). Is there another grommet where the cable goes through the torque box and back under the car? (lower arrow) It appears to be...

can someone send me a picture on the nuts that hold the electrical connector to the firewall on a 72 Roadrunner? I bought the engine compartment bolt kit but I've lost track of what's what and I have bolts and nuts everywhere

I'm finalizing my shop wiring and adding the 220v circuit for the yet to be purchased air compressor. I understand the baisics of AC wiring and load ratings but I'm unclear if I should install a 3 prong outlet or a 4. I'll most likely purchase the 5A Ingersol compressor from Northern took...

While researching my backward caliper issue I was looking as some of my old pictures and thought it would be interesting to see some before and after photos of our cars.