Search results for query: *

I am looking for a driver side quarter panel trim piece for a 1963 Dodge 330 2 door car. It is stainless and is about 1/2" wide and about 7 1/2 feet long, hockey stick shaped. As an alternate the same from a 4 door and I could weld it to my damaged piece. Anybody? Thanks, Jeff J

Looking for a driver side rear quarter stainless trim for a '63 Dodge 330 2 door. Alternately I could piece together what I have with that shorter piece from a 4 door car. Jeff J

Is a Walbro 255 litre per hour pump big enough for a srt8 hemi swap with a bit of room or would it be better to buy a 340 ltr or 400 ltr size pump to have more room for future mods? I don't want to waste $ and have a bigger(noisier) pump than what is required for say, up to 500 engine hp. Any...

Any reason that the steering box cannot be moved toward the D side frame rail for more header clearance? There appears to be at least an inch more room to the frame rail from it's current position. I'll try to post a picture, 1965 Satellite. As built, the P side inner tie rod is just...

Does anybody have easy access to measure the distance from the right inside frame rail to the centre of the crank; the same from the left inside frame rail and the same from the top of the stock K member to the centre of the crank in a 1965 B Body? A 62 to 65 should be the same I think...

Here are some pictures of my stuff in it's current state..............and I have some questions regarding engine options and the members opinions: There is the original 383 freshened, 060 over, std steel crank with cast pistons, mild cam but have 1.65 isky rockers to bring it to .550...

Hello everyone; thought I'd say hi rather than just lurk the site for info. I am working on a 65 Satellite over the past few years and am getting more serious about getting it on the road of late. It has been an every nut and bolt restoration in my odd extra time so it has been a long process. I...