Search results for query: *

Yes ! Felt so great to get rid of the rust! Now I have this to figure out.... the rear corners of my roof are rusted. Only one is rusted through

Thanks guys. I will change my oil before the car moves again. Thanks for reminding me about getting fuel in the oil. I got alot done on the car today.... got my new floor pan installed and got rid of the rest of my other interior rust. Im going to prep and spray the interior with some...

Got the car timed and I also had to remove the needle and sest on the primary side because it was sticking open. The car is running awesome!! Going to hopefully start taking measurements and such tomorrow for the floor pan replacement

I'm also going to get rid of the ignition control boxes and the seatbelt safety switch mounted on the firewall. If I have time this weekend. I will open up the wiring harness and remove ask the corresponding wires

Haha you got it its a 74 dodge charger. Makes perfect sense that the mystery part (steve) was the seatbelt thingy because when I stripped my interior, there were lots of wires going to the seat belts. They were all disconnected though, so maybe someone already bypassed it.... I'll get rid of the...

Hmmmm ok. Ill take another look at it. - - - Updated - - - Just got my KMJ performance hei distributor and fired the car up!! Started up so easy woohoo! The car would idle before but not anything else. It would backfire and shoot lots of fiery flames. I drive the car into garage BARELY and...

I have 4 parts on my dash and I would like to know what they are!! I just installed a HEI distributor and I want to know what I can get rid of. thanks!

wow that is seriously some amazing work on the rust repair. i hope my build doesnt require this much work.. i just bought a driver's side floor pan im getting ready to take on the replacement job...

Got my radiator fixed for $30 and painted woohoo. - - - Updated - - - my new driver's side floor pan came in the mail yesterday from roackauto. the cut quality and bends are not that great. i guess thats why it was $67 and not $150. i fit the pan into the floor, and it seemed to go in...

Got all my interior parts cleaned up today with some degreaser and soap so I can paint them black soon. - - - Updated - - - Gonna take my radiator to the ship tomorrow to get fixed. It's leaking at the radiator cap neck where it meets the base. Also took a wire wheel to it to get the...

It measure about 6x6 without accounting for the hump so I'll order 7x8 probably to have some extra

Thanks a lot! Haha yeah it is already warming up. I had to get out my port-a-cool fan yesterday. If my radiator is too bad to repair, or it cost more than $100 to fix, I'll buy that all aluminum one. It's a really good deal. I think I will probably put on some dual electric fans also. Instead of...

Thanks! I checked out your build, I love that color!! I rebuild the demon carb today, replaced all fuel lines, thermostat, temp sensor, and the radiator cap. Got the carb rough tuned and fired it up!! It idles great. Doesn't do so well under heavy throttle. The car has a Mallory ignition box...

I found a driver's side floor pan on rock auto for $58 plus shipping. Seems like a good price to me

Im going to try to find a cheap pan online. Are the any guides on this site? I know it's pretty straight forward, but pics and a walkthrough are always awesome

I got the rest of the interior minus the dash out tonight. Got the floor evaluated after I stripped the surface rust of with a wire wheel. It looks like the drivers side floor pan needs to be replaced no way around it. The rust isn't really bad, just pin holes here and there, and one that is a...

ok cool. i'll see if i can find a shop around here that will sell some to me. any idea how many square feet i will need? i imagine that is how they will measure it...

I am about to buy a new carpet kit for my 74 charger. i threw away all the old padding that was stuck to the floor under the carpet. what should i replace that stuff with? this is a budget build... thanks!!

well luckily my grill inserts are in really good shape. just my tail light housings are bad. i am going to paint my grills. i'd really love to get some superbee style tail lights...

thanks for the info and great pics!! i think my housings are too far gone to repair unfortunately... i guess im on the hunt for some 3rd gen tail lights - - - Updated - - - so tail lights from a 1971 Dodge Charger SE Superbee would fit right? i found some on ebay