Search results for query: *

I have a 72 Satellite with a 526 stroker running Pro Comp 90 degree spark plug angle and power steering along with a mini starter. I currently am using a set of Jegs Ceramic headers which, the best I can tell, are a Hooker 5903 look-a-like. Headers fit pretty good with the only clearancing...

G-FORCE Harness Hardware - Seat Belt Bolt-Down Ends for 3" in Wide harness - made of Steel - Zinc Oxide Bolt holes are 1/2" The two package bolt ends are stamped "052710" where the two unpackaged are stamped "052710" and "011410" all carry the model "GF-103 ct". All are the same size and...

Pulled this temperature control panel from my 1972 Plymouth Satellite. Looks to be in good shape. See pic for part number. Asking $50 plus the ride.

Have just pulled the bucket seats from my 1972 Plymouth Satellite Sebring. Both seats have been recovered and are in very good shape (see pics below). Please message me if you have questions about fitment as I don't know if these seats are from this car (maybe a Plymouth Fury or Chrysler...

Hello, I have a 72 Satellite that I installed a line lock on the front disc brakes. I installed it before the distribution/proportioning block. After installing I found the instructions and to my surprise it read that the LL should be installed after the d/p block. I don't understand the...

This is a Aluminum Billet double groove Crankshaft Pulley for Mopar V8 Engines. This pulley was pulled from my BB stroker motor but will fit small blocks. I have included close up pictures of mounting measurements. This pulley was designed for use with stock power steering and alternator...

Mopar 3 Groove Crankshaft Pulley Part # 3897916 Pulley is in great shape. Pulled this from my BB but I believe it will fit SB engines as well. Pulley diameter is 7 1/8" with a depth of 3 3/4". Like to have $45 plus cost of shipping of your choice.

$50 OBO plus the ride This is a Aluminum Billet double groove Crankshaft Pulley for Mopar V8 Engines. This pulley was pulled from my BB stroker motor but will fit small blocks. I have included close up pictures of mounting measurements. This pulley was designed for use with stock power steering...

Looking for a 2 groove crank pulley for my 440 motor. Presently running ps on outer goove and WP and Alt on inner groove. My current crank pulley is twin groove 5.2 inch aluminum reduction pulley which I fear is not spinning the WP fast enough to cool the motor in hot days with slow moving or...

26" 3 core radiator. Pulled from my 72 Plymouth Satellite. Clean, no leaks, and has been re-corded. Asking $200. This is a factory piece.

Pulled out the old sweep instrument panel in exchange for an after market panel. Moved to a GPS speedometer as I was tired of messing with inaccuracy when changing diffs and tires. Equus does not make a GPS speedometer so it doesn't blend well. Was figuring to use a Equus bezel and face but...

Just converted over to a custom instrument panel and everything is working fine except my drivers side turn signal indicator comes on solid when the lights are on, be it in the running lights position or headlights position. All lighting on the new panel is LED. When the light switch is off...

Catch Can Mounting Bracket Zinc-plated Steel Bracket (silver) Includes: (Stainless Hardware) (2) 1/4"-20 x 3/4" FHSCS (2) 1/4"-20 x 1" HHCS (2) 1/4"-20 Nuts (2) 1/4" Washers (2) 1/4" Lock Washers Asking $10 and I will pay the shipping to the lower 48 Somerset, KY. zip 42503

Equus 2" 3 Gauge Mounting Bezel 7"x3"x3/4" No face wear This unit is Metal Asking $10 and I'll pay shipping to the lower 48 Somerset, KY. zip 42503

Pulled from my 1972 Plymouth Satellite Sebring. All gauges and lights work however the clock works intermittently . Instrument Panel, Gauges and Displays have not been molested. I find no visible cracks or chips. This unit was working when I replaced it with a Custom Panel. I believe...

G Force Racing 3" Seat Belt Bolt Downs for Seat Belt Harness Summit sells for $4.99 each plus shipping I'm asking $12 plus the ride.

Catch Can Mounting Bracket Zinc-plated Steel Bracket (silver) Includes: (Stainless Hardware) (2) 1/4"-20 x 3/4" FHSCS (2) 1/4"-20 x 1" HHCS (2) 1/4"-20 Nuts (2) 1/4" Washers (2) 1/4" Lock Washers Would like $10 and I'll pay the shipping or make me an offer.

Equus 2" 3 Gauge Mounting Bezel measuring 7"x3"x3/4". Bezel has no face wear. This unit is Metal. Would like $10 and I will pay shipping, or make me an offer.

Pulled from my 1972 Plymouth Satellite Sebring. All gauges and lights work however the clock works intermittently . Instrument Panel, Gauges and Displays have not been molested. I find no visible cracks or chips. This unit was working when I replaced it with a Custom Panel. I believe...

When I turn my lights on whether it is parking or headlights my temp and fuel gauges will change to higher levels. If I have a directional signal on it will stop flashing if I turn the lights to either parking or headlights. I have swapped out all my 1157 type incandescent bulbs for 1157 LED...