• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: 71newp
  • Content: Threads
  • Order by date
  1. 71newp

    Another shock question

    So I had some more time to work on my 1976 Cordoba's rear shocks. So when I got the lower eyelet/bushing on the stud I see this: My question is - Will the bushing compress enough once I get the retainer and bolt on, or do I need to trim back the bushing? Thank you.
  2. 71newp

    Rear Shock Upper Bolts

    I am replacing the rear shocks on my 1976 Cordoba. The upper bolts are really rusty. They are so rusty that they only came out of the sleeve after a lot of work. Do I need to use grade 8 bolts? The heads of the old bolts are too rusty to tell if they are marked as grade 8 or not. Thank you.
  3. 71newp

    Removing Bumper Fillers

    I have also listed this in the "Paint, Exterior, etc" forum but I thought this forum might be a more direct source of information: I am trying to remove the bumper filler from the passenger-side rear bumper of my 1976 Cordoba. Can these be taken off of the car without removing the bumper? I have...
  4. 71newp

    1976 Cordoba Bumper Fillers

    I am trying to remove the bumper filler from the passenger-side rear bumper of my 1976 Cordoba. Can these be taken off of the car without removing the bumper? Thank you!
  5. 71newp

    Cowell Vent Covers

    My windshield wipers broke, and I believe that I need to remove these to begin the repair process. Mine are in pretty good shape so I would like to do this properly to give them every chance to survive! What is the proper way to remove them? Thank you!
  6. 71newp

    How to remove a bulkhead connector

    I cannot find where the FSM describes how to remove the bulkhead connector on my 78 Magnum (360 2-bbl, A/C, CC). The illustration in the FSM seems to show that there are just a couple of internal clips that hold it on. So before I made a terrible mistake, I thought I would come to the experts to...
  7. 71newp

    Inline tube brake line question

    I am trying to install the right front brake line from an "Inline Tube" kit on my 1978 Magnum. The car has A/C, emission control stuff and Cruise Control. I can't seem to figure out how to install this without cutting and splicing (or removing the engine:eek:.) Is anyone familiar with this kit...
  8. 71newp

    Upper Bezel Removal

    Hello to All, I am trying to remove the upper bezel on my 1976 Cordoba, so I can get at the headlight switch. I have a FSM, it does not have detailed instruction. Basically, the FSM sez to remove the screws and pull it off. The screws are out, but I can't get it past the steering column?? What...
  9. 71newp

    Alternator Question

    I have a '76 Cordoba that has a 60 amp alternator. I have heard that the wiring harnesses were "sized" to the alternator. If this is true would it be dangerous to upgrade to a 78amp alternator? My 60amp has a single groove pulley, the 78amp has a two groove pulley. Would this be an issue? Thanks
  10. 71newp

    A518 pan on an A904

    I have heard that if I use the deeper a518 transmission oil pan I will need a filter extender. Where can I get one? thanks
  11. 71newp

    How do I get this steering wheel off?

    Or more accurately, how do I get the round center pad off without breaking it. Once I get the pad off I think the FSM will get me the rest of the way. Also, is it possible to re-size images? If so, how? Thanks
  12. 71newp

    Special Tool C-3748

    I may need to remove a Holley 2245's power valve. The FSM sez to use special tool c-3748. Where can I get one? Thanks, Tim
  13. 71newp

    Turning over the engine by "hand"

    I want to check/set the air gap (reluctor to dist pickup) on a '76 360. What size socket is needed to attach to the front of the engine (balancer/crank) so I can turn the crank to get a tooth to be in the proper spot? Do I need to only turn it clockwise? Thanks, Tim
  14. 71newp

    Remote starter switch

    Hi, How do I hook up a remote starter switch to a 1976 Cordoba, 360 factory ignition system? Thank you, Tim
  15. 71newp

    Weird Spark?

    I have a '76 Cordoba that won't start. It is getting fuel (wet plugs.) When I try to start it, it seems like it wants to start as soon as I disengage the starter, that is as soon as I release the key from the start position. I hooked up a spark tester and got the same result..as soon as I...
  16. 71newp

    SOLD WTB: 15x7 wheels

    Not too picky. They just gotta fit a '78 Magnum. Stock factory, driver quality Cragar, or keystone. Need to be true and in SE Wisconsin or close to it. Thanks.
  17. 71newp

    Alignment in Milwaukee

    Where can I get an "old school" alignment done in the Milwaukee Wisc area? Thank you. Tim
  18. 71newp

    Magnum ride height

    What is the stock front and rear ride height for a 1978 Magnum. Thank you.
  19. 71newp

    Horn Problem

    I posted this in the electrical section, but have received no replies yet, so I am posting this here with hopes of getting better results!! I have a 1976 Cordoba. One morning when I started it, the horn went on by itself, then over a period of 1-2 seconds faded out. I have determined that...
  20. 71newp

    Horn not working

    I have a 1976 Cordoba, One morning when I started it, the horn went on by itself, then over a period of 1-2 seconds faded out. I have determined that it is blowing the fuse (according to the flow chart in the FSM) due to a bad ground. When I replace the fuse I can hear the horn relay clicking (a...
Back
Top