Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi. Still available? I need a 70 road runner lower grill - mine just got munched as son dumped the clutch in the jeep and launched it into the road runner... taking out the lower grill driver side upper grill and driver's side fender...
If your sheet metal is good, would you consider shipping to...
The transmission I had asked about measured at 31 3/4", and the 727 trans in my roadrunner measured 36" from face of bellhousing to rear of output shaft. The Winnebago trans also had a drum brake attached to the rear yoke, and the 413 motor that it was attached to did have the waterpump...
Anyone know if the 727 transmission used in older Winnebago's work in the 68-70 mopar b-body cars? In particular, I am wondering about a 73 winnebago whose running/driving 413 and 727 were removed - and wanted to know if I could take the trans to replace in my road runner. But I thought the...
I wanted to ask for recommendations for front tire size, for my 70 road runner. I have just installed the 11.75" rotors and purchased a set of (4) 15" mopar cop rims for the car, to replace the 14" magnums that were on it. The rear has 275 60 R15 tires, the front does not yet have tires...
(also posted on for a bodies only)
Does anyone know if the '80 st regis cop car disc brakes can be used for swap onto early a body barracudas? I am familiar with the late a body disc swap - as I just did that (slider calipers, 11.75" rotors) on my 70 road runner. I found (2) 1980 st regis...
Thanks for comments. I knew that it would require teardown, and clean up at the least. I was just trying to kid myself that it was ok. Removed intake, rocker arm covers, and discovered evidence that moisture and critters have been here.
Good thing summer is here... Ive got a lot of...
I purchased a rebuild 360 long block about 7 years ago - meant for installation and use in my 1969 barracuda. The motor was installed in the car and no further work done (accessories and wiring not installed) -due to my extensive work related travel. In those days, I was a contractor field...
Ive been stupid. Or maybe it was the several Fransiskaner hefeweisen I was enjoying while working on the car. Damn those are good. Anyway, the calipers are on the correct side of the car, but I was installing the hose/banjo bolt assembly backwards. Meaning, the banjo bolted end of the hose...
I should have offered more detail: The caliper mentioned in previous post is a 4-piston design; definately not the one piston design I meant to use. I do not intend to reuse the 4 piston caliper, but was hoping the spindle is suitable for single caliper brake upgrades on one of my other mopars...
Anyone recognize this brake setup? Found a pair of mopar disc brake assemblies in the shed and forgot where I got them from. Its been a few years. The rotors are 11.75"
I bought my 70 road runner with lost title in Maryland last year (lived in VA at the time) thinking title would be easy to obtain. It was a major hassle, which took several months time. Apparently, the previous owner moved around a lot and the car came from the midwest - and was never titled...
Selling 97 Ram 2500 ext cab 4x4 w/12V 5.9L cummins motor. Truck has 170K miles and I rate it as KBB Fair condition (small dent behind driver door becuase I slid into fence the other day pulling into backyard, and has slow discharge of battery via parking lamp circuit - have not found cause)...
I am seeking quotes for shipping my 69 Coronet RT (nonoperational) from VA to WA. Got the job with Army Corps of Engineers and finally get to move home. Will haul the Road Runner on a trailer behind the truck, but have to ship the Coronet. Any recommendation on dependable services would be...