Search results for query: *

i have a '63 plymouth belvedere with a 440 engine. i want to go fenderwell headers. where can i get a set reasonably priced. thank you

i've got a '63 imperial 413 motor i am going to rebuild hopefully just a re-ring. it will go into my fed. i am aware that the bottom end is the same as the 440 but what i would like to know is why is a rebuild kit so much more for the 413. if everything except the pistons is the same why so...

i have a '63 belvedere with the stock rear end. i know you all will say just get a later rear end and i have several ones too. what i would like to do is use the pumpkin and axles from one and put them into my original. i don't want to have to cut down the later one to match the width of the...

a friend of mine has a '58 hemi in a '56 ford truck and he asked me if you can change it to a floor shift. the trans is the one that came with the hemi. i kind of remember somewhere i heard that you can but i am old so who knows. i suppose he could change the trans to a late model 727 right?

i am wanting to change the rear to a later model type and i heard that i can just change the third member and the axles to the later style. are the axle bearings the same size in both housing? i know i have to cut and respline the axles. the whole reason for this is because i don't want to cut...

as it says, that's what i have and it seems nobody has one rebuilt. please don't say rebuild mine. it is really worn out. i did that and it didn't last. leaks and massive play. i want to get firm feel or steer/gear but nobody answers or calls back. what i would like to know is, what years can...

tell me what is involved in changing a push button trans to a regular shifting trans.

i am having no luck buying these. i have bought them from az and the rock but, they were for the newer rears. this is for my '63 Belvedere. does anybody know where to get them. these are the seals that are in the retainer. i would like to get the right ones before i go broke. it's not worth the...

does anybody know where to get the tool to remove the axles from my '63 belvedere. not the hubs, i got that one. i may have to make one.

i have a '63 belvedere with the stock box. which has a 5/8th size nipple coming out for the return line. my problem is, i used a '77 charger saginaw pump which has a 3/8th line coming out of the back. i have had a heck of a time trying to get this to work. i have had hoses made up by hydraulic...

does anybody know if you can take a 71 dodge third member and put it in a '63 belvedere 8 and 3/4 rear. i am not talking about the whole housing. it has the woodruff keyed axles and i thought i heard that this has some kind of shims or something different than the later rears. i can put the...

i believe there is a regulator on the circuit card on this car. how do you wire an autometer mopar fuel gauge in? number 880785. mine fell apart. i have put in an aftermarket amp and mechanical water and oil gauge in the stock panel. i am going to fab a new flat panel and will be able to put...

what do you all use for these? straight ones touch each other because of the slanted plugs. my motor has a terrible miss at idle but runs great going down the road. it just seems like it happens at idle, but once you give it some gas and get off idle it runs fine. i have changed carbs to a known...

i have 2 of these pumps and they both leak at the reservoir to pump surface. they both work ok just leak. i took them apart and they have the square cut o-ring. i can't find anybody in the chain stores that know what their kits have in them. the guy at napa said, "they don't carry many kits...

i have a motor home 440 engine that i assume is externally balanced. i also have a neutral balance steel crank. can i have the rods and pistons balanced to use the steel crank? it is backed by a neutral convertor 727 trans. i don't have the harmonic balancer and haven't cleaned the motor to see...

this thing is driving me crazy. '63 bel stock tank. i stopped driving it and put another motor in it and that took 3 days. i had 7 gallons of gas in it. when i got done with the motor swap i tried to start it and no gas came from the tank. i put another 5 gallons in it and still no joy. i put an...

now this is just a question to start a conversation so don't tell me to just buy a 360 ok? it seems a lot of parts interchange. if a person say, had a 318 and a 360 but the 360 block was cracked for instance. would the internals interchange. i know the 318 would probably need to be bored to the...

ok now don't shoot the messenger!! i am just wondering if this is possible. yes i know, why do this when you can find 440's all day long and i just did for 350 bucks the other day. i also saw a 413 complete from a rv for 500 bucks and that got me thinking. if you had all the parts from a 440...

i have a '69 and a '71 318 la motor. the '71 came from a truck and has a straight filter attachment. the '69 has the adapter that makes the filter go back toward the rear of the car. the '71 has a sheet metal plate and no adapter. can the plate be taken off and put on the '69 motor so the filter...

i changed my '69 318 for a '71 318 and i now have vibration throughout the car. i had to change the front timing cover because of the timing mark. i used the '69 damper to match the timing mark. what i am curious about is do the two dampers have the same balance.