• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. S

    64 polara body side molding plastic clips

    Not to be rude, but if you couldn’t get them to work, you didn’t install them properly. They literally turn into the trim and wedge in tight to the trim. The ends are tapered so they get tighter as they’re turned in. I actually had some factory connectors for one piece and put it on with those...
  2. S

    64 polara body side molding plastic clips

    I used these on my 64 Polara. Got the larger ones for the bigger trim and these for the smaller. They work great and are cheap. 25 of the small ones are like $11. I just pushed them in from the outside how ever far I could get them and then grabbed them from the inside with pliers and gave each...
  3. S

    Shallowest water pump/radiator combo for 64 Dodge?

    Just for reference, the shallowest you can really trim this fan is around 4 9/16”. That leaves about 1/16” between the fan center and the radiator. No clue why that one site was showing you could cut it to 4 1/4”. Still working with the math to see if I can squeeze it in, but so far it looks...
  4. S

    Shallowest water pump/radiator combo for 64 Dodge?

    I’m currently only running an alternator, so I was just gonna run a standard v belt off the crank if I switched to electric. If I keep a mechanical pump it’s really no issue moving the alternator back to get the pulleys to line up. I actually had to adjust the alignment slightly on the Tuff...
  5. S

    Shallowest water pump/radiator combo for 64 Dodge?

    I need to measure my other Polara. I have the Gerst front end in it, but I believe I got the newer B body version. This could be a good idea.
  6. S

    Shallowest water pump/radiator combo for 64 Dodge?

    It is. I think I can get close with getting a radiator that fits flush with the support, and a somewhat shallower water pump. Even the electric ones seem like they’re just as deep if not deeper than stock.
  7. S

    Shallowest water pump/radiator combo for 64 Dodge?

    Ideally I want to stick with a puller since they work better. Worst case scenario, I’ll make it a pusher but trying to avoid it.
  8. S

    Shallowest water pump/radiator combo for 64 Dodge?

    Tried some searching but didn’t find anything. Wanting to add some room between my water pump and radiator so I can run the Dorman 620-118 electric fan. Anyone who has a 64 big block Dodge Polara knows that Mother Mopar did us no favors and left hardly any room in front of the motor, but loads...
  9. S

    FOR SALE 1964 Polara rechromed rear bumper guard frames

    1964 Polara rechromed rear bumper guard frames. These came with a project car I bought but I’m not gonna use them. I’d rather look at three bumper bolts plugging the holes on top of the bumper than these. Just not my thing and I’m not going for originality. $175 for the pair, shipped to the...
  10. S

    64 Polara bucket seat pivot bolts...

    That does help. I can hunt around to see if I can find something similar now. Thanks!
  11. S

    64 Polara bucket seat pivot bolts...

    That would be awesome if you could. Still haven’t gotten anywhere on the bolts. I did get my Gerst setup installed. Although I haven’t driven the car yet, I can tell it’s a pretty amazing system. You’re going to be amazed at how well put together it is and how easy it goes together.
  12. S

    64 Polara bucket seat pivot bolts...

    Bought a car that had the seats redone and they weren’t reassembled. Unfortunately, the pivot bolts are nowhere to be found. I’ve searched online and haven’t located a set. Anyone know where four could be found? Or, does anyone know the measurements of the factory pivot bolts so I can make...
  13. S

    Nice broadcast sheet looking for its owner...

    Long shot, but does this build sheet belong to anyone’s car? Came with a 64 Polara 500 I just got, but it doesn’t belong to my car. The car originally came out of New Mexico and apparently had the front buckets swapped out at some point. This was found in the passenger seat back. It’s in great...
  14. S

    Another dreaded fender tag decoding request

    Here is my other one in its current state.
  15. S

    Another dreaded fender tag decoding request

    Here it is. A little bit of paint work and it’s ready for reassembly. TON of new parts, to include all new interior. I’ll add AC and this one will become my daily. My other 64 500 will be the toy, once it’s finished.
  16. S

    Another dreaded fender tag decoding request

    Just picked up another 64 Polara 500 and was hoping for a little help decoding the fender tag, as it’s a little like trying to read Chinese. I know it’s a factory four speed car and it currently has a 440 in it that is not the original motor. Previous owner thinks it was a 383 car but he isn’t...
  17. S

    FOUND Transmission crossmember for 64 Dodge

    Looking for a transmission crossmember for a 727 to fit a 64 Polara. I'm located in Georgia. Thanks
  18. S

    FOR SALE trans crossmember

    What's this fit? Looking for one for my 64 Polara. If it fits that I'd like to get it. Thanks
  19. S

    WTB Autometer Lunar Series Temp Gauge

    I have the tach and oil pressure gauge, need the temp gauge to complete the set. Anyone have one kicking around?
  20. S

    Anyone use a universal tubular transmission crossmember?

    Putting together my 64 Polara and am needing a transmission crossmember. I was looking at one of the universal tubular styles and was wondering if anyone has had any luck with putting one in. From what I can tell, in order to get the mount to line up properly, it would need to go in line with...
Back
Top