Search results for query: *

I had upgraded my fuel line to 1/2" when I put the six pack on so I used that for the fuel line. I have a vapor worx fuel controller and a Cadillac CTS fuel pump. The controller controls the speed of the pump to maintain constant fuel pressure so a return line is not needed.

Thanks

That was my setup. I got it running this spring took a little time to get it tuned had some timing troubles but got them figured out. You can definitely feel the difference from the six pack setup.

I’m still working on cold start and warm up it’s perty good but still needs some work. Once it’s warmed up it is right on low end torque is unbelievable pulls way better off the line. Didn’t make it to the track this year but it is a huge improvement over the regular six pack set up. Overall I...

The mopar performance covers are more rounded on top so the coil packs mounting brackets don't fit very well I shorten mine up about 1 1/2" so they wouldn't interfere with the breather and pcv cover I have air too so that needed to be considered when cutting the hole for the pcv valve.

Thanks Burbnicks No offence taken. I have a mixture of old and new school parts a lot of them I made myself I like the the look of coil packs on the valve covers for me it adds to the wow factor something you don't see everyday. With the sixpack setup computer wiring and fuel system I have about...

A few more pictures jeep cam sensor and adapter. I used a Cadillac cts-v fuel module with a vaporworx fuel pump controller mounted in the tank Its running still working on the tune. I bought the computer system from Rich at fastmanefi he has experience tuning six pack setups. My...

Up date fuel injection installed and running. This winter project has been installing six pack fuel injection and computer. I went with Holley HP with LS wiring harness. It is set up for coil near plug system and I'm using GM truck coils and 58x trigger wheel with Jeep cam sensor. Some crank...

Thanks I checked the air cleaner height today it sits about 3/4" higher then the six pack air cleaner My base plate sits flat on the throttle bodies. The six pack air cleaner sits 3/4" lower then the throttle bodies. I have plenty of clearance to the hood with my setup but I' running a stroked...

I checked out their web sight. That's where I got the idea to build it. It's not billet but I think I can get it done for about for about $1400 without the electronics. F&B system doesn't include the electronics.

Total height is the same as the carb setup. The air cleaner might be a little higher I made a new base plate that sits flat on the throttle bodies. The six pack base might sit a little lower I can check it out. It fits on my Challenger six pack with no issues. HYRDGOON If you figure your time...

Thanks I have lot of hours in this project I think I have around $800.00 in it so far.

I started with a 383 sixpack intake and bored it out to 48mm and welded in injector bungsI got three throttle bodies for a 2001 dodge ram and milled the tops down. From this to this. I took a 3/4" piece of aluminum plate made a template to mount the throttle bodies to the intake. Made spacers...