Search results for query: *

Finally got the car down the track. Only made 1/8th mile passes. Best 6.736 @101.91 w/ 1.484 60ft Made 6 total passes most being 6.74-6.76 @101.95 w/1.50 60ft I didn't adjust anything i.e tire pressure, shocks setting. I just wanted to get a base line and get the car down the track. It was cold...

I just replaced my SS springs with new ones because the car was sagging a lot on the pass. side. When I laid the old one on top of the new one there was a 3-5" difference. The old one was flattened out for sure. So I knew I needed new ones. Now that I have all new parts bolted in the...

I am getting ready to put single adjustable rear shocks on my drag car only. Was wondering what my starting point should be. Max tight setting or loose and adjust until I find the best 60' times? Front suspension: 90/10 Calverts and 318 t bars. Rear suspension: SS springs(in board), Dana w/4:56...

I have a 65 Coronet that has SS leafs, stock height. What adj. shock are you guys running with SS leafs. My car is strip only?

For some reason my pass side rear shackle rotated backwards so the angle is different than the driver side. The car now sags on the right side. How do I adjust it back and how could this have happened? I have looked things over and haven't found anything obvious.

65 Coronet, 685hp@5900 696@4800, 727 w/4800 stall, Dana w/4:56 and 29x10.5w Hoosiers. Not sure of weight but has normal drag car interior, fiberglass (hood, frt & rear bumper) aluminum (heads,h2o housing, intake, radiator) battery and cell in trunk. Car is drag only. I am sure I left some...

I need to remove my pitman arm but can't seem to find the right size socket does anyone know the nut size? It is for a 65 Coronet w/ manual steering

I installed a new converter and there is a 3/8 or wider gap between the flex plate and converter mounting pad. I started to bolt them up but I am afraid that it is going to pull the converter off the trans pump gear (not sure that is what it's called) because the converter moved forward...

Asked last year so I figured I would ask again. Who's going and whatcha you looking for? Me, I'm looking to pick up a new set of tail light surrounds and front Dodge triangle emblems for the 65 Coronet

IF you had to chose between the two which would you pick? I can't stand either one but each one has a few special editions that are cool even though they are not MoPars but I am not talking about those. Just the run of the mill SS vs. the every day GT. Which would it be? Old not this new...

Changed over from a 3500 to a 4800 stall. Got it installed today and hopefully in a few weeks the car will be running and ready for the track. Shooting for 10.50

I am watching this show and they are showing an 69 SS 396 Camaro clone. They show him leaving the parking lot spinning the "tire". Damn A$$ Clowns couldn't even put in a posi to complete the job. No worries for the seller because some sucker will pay crazy money cuz it says Camaro. Dime o' dozen...

IF you could afford it what would this be worth to you. I have found the car that my father bought new in late 69' and I was brought home from the hospital after I was born in. OK here is the car; 70' Cuda 440-6. The car is all original. I found the car at our local cruise in. I talked with the...

I am looking at one and was wondering if any of you guys have any info on them such as any problems I should be looking for. It has 210,000 on it, 4x4, crew cab, manual

How do I get the coupler retainer to hold to the coupler housing?

I took out the big bars. They measures 1.08, they are aftermarket. I going to put the stock (.88) back in. The issue I am having is the hex ends are not lined up. The flat sides are not lined up so how do I get them in. Do I have to lift the control arm to get the hex end lined up with...

I have a set of bars that are marked 334 (L) and 074 (R). Where can I find a list to show me size/application of the bars? - - - Updated - - - Ok wrong side. They are listed 776 and ?, the number is worn off. Would that be 777? They came out of my 65 coronet but I replaced them with bigger...

I was looking at their 505 Killer Krate. I was wondering if anyone has dealt with them. Quality of parts, customer service, ect... Any info would be helpful.

Put a rod through the block last night so I am on the look out for a 440 block. I guess I am done for the year, totally suck because I didn't even get one run in the year. I did the burn out and as I was staging I noticed something was really wrong so I shut it down. Got back to the trailer and...

I installed a LED light for a low oil pressure warning light but it soon quit working. Is there a capacitor that I need to install to prevent this from happening again. I figured it was a matter of hooking them up but I thought I read somewhere that LED lights need something added in-line when...