Search results for query: *

So what brand of oil do you use in you engines? I use the Joe Gibbs DRIVEN HR-2 High Zinc 10W-30 and it seems to be good. What do y'all think? Just some pics of my love to enjoy while we discuss this =P

So i have a question about the gaskets for the intake on my 383, so i have seen some use only the valleypan and some RTV and some use some kind of "paper" gasket with the valleypan. What is the way to go with a original intake?

So i got my booster rebuilt, after trying a NEW booster which was faulty and modified the OE bracket so my question is are there different bracket more than the bigger on and the smaler one? The one on my 70 Charger (the one on the drying rack) had 4 holes for the booster and 2 smaler one on...

So i took apart my booster for my 70 Charger, i filmed it all but it sliped out of my hands so there are some pieces that i dont know where they go. What i know there are 2 versions of these, i got an exploded view of the other one that i don't have. Do anyone have an exploded view of the...

There is always something going on... So i have had brake issues that some of you may know, now i could finally drive the car out of the garage barely... It runs like a sack of ****, i should have an idle of 750 but its more around 500-400, this was last week, now the oxygen sensor is shot and...

So i think i need to change som of the orings in my combination valve, does any of you know what size all of em is? It the one on the left in the picture

The filter i have now is 12.80"x 2-3/4" but it isnt tall enough, it needs to be like 3-11/32 to 3-1/2 Does anybody know?

Never had any issues with bleeding brakes EVER until now when i had to buy a new proportioning valve. Thoes plastic bleeder thingy won't fit, i tried gravity bleed with no luck. I got fluid down to the block, front calipers bleed fine, but no fluid goes through the block to the rear brakes.

Which is the best distribution block to buy for a car with discs in the front and drums in the back with OE fit.

So i bought a new brake booster for my 70 Charger from summit, Summit Racing SUM-760171 Summit Racing™ Power Brake Boosters | Summit Racing The mounting studs dosent fit and the the hole for the pushrod is also to small.... Is this just what it is to buy a " direct replacement" part like this?

So i had to buy a new brakebooster, as shown in the pictures the little one on the right is what it came with, to the left of that is the one from the 53 yr old OE one. And the longer one is what i had to get cause the little one was to short for my setup. I couldnt find any measurement in...

So i got a new vinyl top put on that car last autumn, noticed today in the garage that is has some air bubbles starting to show. I guess the glue wasnt put on as it should or something. So in the US what kind of glue do you use? What did they use in the 70s?

So i bought a new set of clips for my vinyl top trim, i didnt those "golden" to the right on the picture, where on the trim do they go?

So i got a new vinyltop mounted on the car now cause the old one wasnt good enough, so i wanted to ask you guys/gals if the clips on the trim that goes just below the Charger emblem needs som sort of seal? I think i have seen it before but i could be wrong =P

https://www.doctordiff.com/aluminum-master-cylinder-kit.html

Posted this on Facebook to: I think i have asked this before but i want to get me som black steel rims with the small hub cap. I want the rear wheels to really fill the wheel house, i think 275/60 look good, the width of 295/50 looks good but sometimes the hight looks weird. So if i go with...

So i installed the 650 Holley Sniper last summer but havent the kickdown to work, do you guys that have a Sniper on your bigblock any solution for me so i can fix it?

So where do i buy the best vinyl top material for my 70 Charger. Can it be done without rip out the headliner? The Charger emblems on the C pillar is mounted with thoes self cuting nut thingies.

Anyone using this in there cars? https://www.doctordiff.com/aluminum-master-cylinder-kit.html Also the 4 piston calipers? https://www.yearone.com/Product/chrysler-b-body/ng669#prettyPhoto

What 3M adhesive to glue rubber weatherstrip would you suggest?