• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Coronet67guy

    No 15x8 magnums anywhere

    So I've already bought my 15x7 wheel vintiques magnum 500 wheels from Jegs for the front of my 1974 Charger. I've looked everywhere for 15x8's, and being told October before I could get them. I've noticed 15x6 wheels are available though. Has anyone ran a 15x6 on the front and a 15x7 on the...
  2. Coronet67guy

    400 rebuild help

    I found an old similar thread but figured best to start a new one. I'm currently experiencing no oil pressure on a manual gauge in my 74 Charger SE. I'll cross my fingers and have an oil pump put on next week, but need to prepare myself for the more likely motor failure. I'll have someone...
  3. Coronet67guy

    It's all about the AC

    Hi Guys. I chose this forum because this is mainly about wiring of the AC. I have a 74 Charger, 400 big block, originally an AC car. When I bought the car all the AC components had been removed from the car, so the next project is getting it all back in. To further muddy the waters my 400...
  4. Coronet67guy

    No kick down

    So I just got this 1407 from a buddy to place on my 2186 dual plane. I added the 1481 throttle adapter but still no kick down. I'm not sure what I'm missing, but honestly to me all this adapter seems to have done is move the linkage further away from the carb. I had to block off the EGR to...
  5. Coronet67guy

    Parts

    Hello, My 400 motor in my 74 Charger is from a 76-78 car. This creates fit issues whenever buying anything that attaches to the motor, like power steering brackets or alternator brackets. My car was an original AC car but someone took everything AC related out of the car. I would like to put...
  6. Coronet67guy

    Easy one, I think

    I'm removing the EGR off my Edelbrock 2186 intake. The throttle adapter my 1407 carb needs is hitting it. I know the 2186 came with some EGR block off plugs, but who knows what I did with them. I'm sure I'll find them after I buy some. Can someone tell me the size of plugs I need? Thanks!
  7. Coronet67guy

    SOLD Hedman 78070 headers, ceramic coated

    These headers were bought but never installed. They were professionally ceramic coated by a local shop, making them the equivalent of the black maxx Hedman headers, 78073. I couldn't return these when we decided to go with long tubes because I had them coated, so my loss is your gain. Verify...
  8. Coronet67guy

    Running hot highway only

    So I got the TTI headers in my 74 Charger. Rear end 3.23 with sure grip. Everything was fine around 40-50 mph during initial break inn. First time on highway it didn't take it long to peg on the H side. Wish I had a gauge to tell the exact temp but never seen the car run near this hot...
  9. Coronet67guy

    Another TTI thread - 74 B Body 400, motor is from 76-78 car

    So full discloser, I'm only sending this out after waiting all day for a call back from TTI, called twice, talked to a lady who said they would call back, and they never did. Lessons learned - Hedman 78070 shorties don't fit a 400 big block 74 charger. Not even close on drivers side. And...
  10. Coronet67guy

    Proportioning valve switch

    So I'm trying to trace down what this switch actually does and what should connect to it. This is connected to the proportioning valve. Nothing has ever been connected to it and the single wire before I cleaned it up looked like it had been burnt. The cruise has never worked on my 74 SE but...
  11. Coronet67guy

    Rear gear set

    Hi All, Toying with the idea of replacing my gear set to get some more power to the rear wheels. Wondered if you guys could give me some suggestions/thoughts based on the following information. 400 Motor. Dual plane intake Adding shorties next week with TTI H pipe. Car will be 2.5 inches...
  12. Coronet67guy

    Header question

    I'm putting some 78070 shorty hedmans on my 74 400 big block. I did look at TTI's but man $370 difference for the raw steal ones. (I'll be getting them ceramic coated locally for $175). For connecting the header to exhaust, TTI specifically calls for some 2.5 inch header adapter pipes, sold...
  13. Coronet67guy

    Vacuum hose routing big block

    This has probably been asked before but I did search and didn't find anything. I need to find out where all the vacuum lines are supposed to run. 1974. 400 engine. Pictures of your set up or a diagram that you can actually read would be great! Here are my specifics - EGR valve installed...
  14. Coronet67guy

    My first intake swap

    Hey guys. So I'm swapping out the original intake on my P code 400HP motor in my 74 Charger with the Eddy 2186. A lot of different opinions on the proper way to do this and want it leak free! Here's what I have - New valley pan, and the four paper gaskets that came with that pan. Edelbrock...
  15. Coronet67guy

    Fuel Issue?

    I noticed RockAuto's servers were crashing last night, I guess a lot of us are working on cars right now! I have a problem with my 74 SE, 400 HP motor. Ran great until - Went to body shop for body work and paint, 3 months, then two weeks at transmission shop for rebuild, then three weeks at...
  16. Coronet67guy

    Side view mirror loose

    Hey guys. Anyone know hot to tighten one of these up? Remote racing mirror. Drivers side, 74 Charger. Part 3695513, Wobbles all over the place going down the road. Thanks!
  17. Coronet67guy

    727 Rebuild and Torque converter questions

    So once my 74 is out of the body shop the tranny is next in line. Some specs - Erson Cam with a 1800-4800 rpm range, so needing something in the 2300 stall area. Motor is the numbers matching 400HP with just some slight upgrades. Intake and exhaust manifolds are original. Estimated highway...
  18. Coronet67guy

    Thoughts on no vent/heat air flow

    Good evening all, So I have a 74 Charger. 400 HP. Factory air car but all the AC has been removed. When sitting in the car I get air from the vents in the Max AC and AC spots, but no air in the vent or heater locations. I might add the the air flow doesn't change when moving from low too...
  19. Coronet67guy

    Rotor question and interesting part

    So has anyone ever seen a rotor this bad? Feels like running your finger over small gravel when you check the smoothness. I have the caliper off but it's not budging. Bigger hammer? Or does the bearing cap need to come off? Also anyone seen these before? One behind each wheel. The black...
  20. Coronet67guy

    74 Charger cruise control

    Hey guys, So I just bought my first B Body to have cruise. It's rough but bought it pretty cheap and plan to make it nice again. Nothing is connected to the cruise unit. I did find one cable in the trunk that's the upper cable roughly 40 inches long. There should be a second cable connected...
Back
Top