Search results for query: *

I need to change out the speedo gear in my 68 charger and dont know which gear to buy. Original gearing was 3.23's New Gearing is 3.55's Tire height is 27.9 inches. (285/35/20) At 70mph the speedo is reading 60mph .

Not mine, but came across a CH4B intake on Craigslist in Phoenix for $150. Thought I would share. https://phoenix.craigslist.org/cph/pts/d/phoenix-mopar-ch4b-440-intake/6871259324.html

Cruizing it never happens, but if i get hard on it, and let off, the ignition drops out. Atleast i think its the ignition. During its stumble, its not responsive to the throttle. Take it to neutral and start it back up. It might run a little rough at first but continues on perfectly fine. It...

Worked with Ron mid December to get a Firecore distributor and OE style ignition module installed. Took it to the tuner and put out 310/390 with timing at 25 and 38 at 2,400rpms. While on the dyno, we started having starting issues, and you could even see it on the plot curves. Prior to the...

Edelbrock Performer (1406) 600cfm carburetor for sale. Has less than 1K miles. Nothing wrong with the carb, just want to go with something bigger for my setup. The carburetor is still on the car and I take car for weekend cruises about twice a month. Planned on keeping it on the car until...

I have a complete set of windshield moldings with clips from my 68 Charger up for sale. No bends, twists, or dings. Minor scuffs but can be polished out by hand. $150 plus shipping via paypal.

I am looking for a transmission dipstick with the tube for a 68 Charger big block tranny.

I swapped out my 22" Champion aluminum radiator (4 pass) w/ a 26" US Radiator. Came off my 68 Charger. Wanted a more stock look. It's 22x21-1/2x3-1/2. Its a block style radiator that I added aluminum side strips to fit my core support. I also added aluminum braces across the front face to...

I am looking for a 26" fan shroud for my 68 Charger. OEM or Repop, doesn't matter.

I am looking for the transmission shift lever for a 727 big block with a console shift application for a 68 Charger. It is causing clearance issues between my shift linkage and my kickdown linkage. Please see attached photo for the lever that I need to replace.

Got the car reassembled and have been driving it, but I am having linkage issues. Good Will automatically shift through the gears just fine when in Drive. Will Kick down at the proper points when needed. Bad The throttle linkage lever interferes with the shift linkage when I am in first and...

ISO a automatic console chrome shift knob in decent condition. I don't need the button or the spring, just the knob. The set screw on my knob has stripped.

What would be a reasonable price on a 67 coronet drivetrain? 383, 727, and 8-3/4.

I am looking for a set of seat belt bolts for my 68 charger.

I am looking for a good set of green arm rest pads for the front doors on my 68 Charger.

1968 Charger Rear Window Molding Corner I'm searching for the bottom right corner trim piece for the rear window trim on my 68 charger.

I am looking for the eight small clips that hook onto the fender that allows you to screw the 1/4 window j-trim outside the 1/4 window.

I am in search of the complete shift linkage. I need everything in the photo below with exception of the pivot arm on the left. Application: 68 charger, console automatic, with a 440.

I'm looking for a front bumper for my 68 charger. It would need the bumperettes. Looking for good driver quality or better. You can send pics to [email protected]

I have a 68 charger that I am putting back together and I need the back up light switch that mounts to the shifter linkage. It's what turns the reverse lights on when you put the car into reverse.