Search results for query: *

Looking for a nice condition trim ring for the center grill emblem on a 66-67 charger . I already have the plastic emblem insert just need the ring itself. They are repopped for around 89 $ fwiw. Thanks, Robert

I've done the hemi swap on a 66 coronet, Used the milodon pan and pickup and the Schumacher mounts, the engine was from a 2005 Durango , the stock exhaust cast iron manifolds work, the drivers side one we had to trim some of the heat shield away and grind down a rib on the side of the manifold...

Separate audio amps and the radio's have capacitors in them that charge up when you first connect power, they can cause a small spark when connecting a battery back up even though they are turned off. The thing to check is how much current is being drawn constantly off the battery when...

Yep you need a led flasher standard flashers are designed such that they need a specific # of incandescent blubs in order to operate, when your dash turn signal lamp goes on solid when you operate the turn signals it is a tell-tale that you have lost a front or rear turn signal

If the front and rear turn signal lights come on solid when the turn signal lever is up or down then pull the flasher.. the lights should turn off if they don't you have some other issue either a wiring or grounds . when the grounds are not good at each bulb you can sometimes get real strange...

I don't see any spring under the fitting in the photos in the service manual ? or did you thread the outlet on the control valve body to accept the fitting you mentioned ? This car had so many small missing parts ( like the lock clips for the torsion bars for instance) I want to make sure I get...

Thanks !! That was it Regards, Robert

I don't have pictures of the hose routing under the fender but basically the evaporator/heater box lines come out through the firewall inside the fender area you cut the firewall holes using a template vintage air supplied if I recall ( have to notch the splash guard too ) then the hoses...

66 Coronet, 5.7 Hemi. With 66 Charger instrument cluster, Headlight/grill

Went with vintage air on the 66 coronet it runs the lines under the passenger side fender and they feed into the engine compartment via that suspension adjustment hole in the inner fender panel. The condenser connections mimic the factory routing going over the top of the radiator core support...

Anyone know what thread size/type of the inlet pressure side of the steering box uses ? I think its 1/4 sae straight cut fitting but I need to be sure so I can get the right fitting to attach it to a AN -6 female fitting. I think this is what I need but Id like to get confirmation...

Also we plan to trailer the car to the Mopar show at Texas motor speedway on Aug. 4th, as we still have the power steering and exhaust plumbing to complete

I also built a solution to drive the tachometer movement using a microprocessor and a Can-bus transceiver , It sends a query to the hemi ecu to get the rpm from the OBD2 diagnostic port in the same way a hand held obd code reader does. Then the microprocessor translates the rpm data into a...

Here are some pictures of the interior. the darker red material you see in the corners of the trunk and the lower strip on the door panel is carpet. The Black area in the truck is the access to the spare tire well ( the accesshole cover is not in place at the time the picture was taken.) The...

The car I'm helping to build is currently in the interior shop and the guy that is doing the 3-d door panels is recommending window cranks and door latches from clayton machine works. has anyone used these on a b-body ?. Their fitment lists 49 and up Gm and Fords but no mention of Dodge these...

Thanks ! Here is some pictures of the hood,trunk lids and the sail panel pardon the dust !

New year update. Suspension done, willwood brake system , drop spindles, rear coil overs my friend has buffed out the paint and had some pin striping done. Car wiring is pretty much done, still trying to decide best way to get charger dash tach and speedo work with the hemi.( design and build...

There probably isn't a wire for a CEL most of the newer cars use a CAN bus network or similar and the ECM just sends out a data packet to the dash and tells its controller/computer to turn on/off the CEL. On the 2005 Durango I used for the hemi donor you cant even turn its radio on without...

I still need them but I'm unable to pm you it says your inbox is full

Looking for the trim ring hat goes around the emblem on the 66 charger grill also need the small cover plate that screws to the dash below the steering column Thanks