• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. elliskev2

    Oversized screw holes, screws won't tighten up

    Good idea, probably just the right size. Thank you
  2. elliskev2

    Oversized screw holes, screws won't tighten up

    Thank you Sir.
  3. elliskev2

    Oversized screw holes, screws won't tighten up

    Thank you. I will give it a try.
  4. elliskev2

    Oversized screw holes, screws won't tighten up

    Does anyone know of a trick to get screws to tighten into a mildly stretched hole? I am trying to install the rear view mirror and visors in my RR now that the headliner is in and I have some screws that won't tighten down correctly. Would you hunt high and low for a suitable "oversize" screw or...
  5. elliskev2

    Hard time finding, 3M 08509 auto bedding and glazing compound - is this obsolete?

    I saw that, August :lol: Who would think getting some windshield sealant would be this much of a pain?
  6. elliskev2

    Hard time finding, 3M 08509 auto bedding and glazing compound - is this obsolete?

    Thank you very much. Was hoping to find something local to get the windshield in this weekend. Guess that's not going to happen. LOL
  7. elliskev2

    Hard time finding, 3M 08509 auto bedding and glazing compound - is this obsolete?

    Seems this 3M compound is unavailable, does anyone know of an alternative? Would a urethane product work okay with the rubber windshield gasket? Maybe it doesn't matter. LOL:screwy: Thanks
  8. elliskev2

    B-body Front Upper Inside Header Panel Trim Clips

    That's a good solution. Ticked me off last night while trying to get them in and breaking 3 of them. I knew there had to be a better way. Thanks Mike.
  9. elliskev2

    B-body Front Upper Inside Header Panel Trim Clips

    Hi Gang, Does anyone have a trick up their sleeve to get these clips to hold in place? I have broken 3 of the new clips already. I don't have enough of the original to reuse. Maybe a small pilot hole and put in a small screw? Any suggestions? I'm sure others have had some issues. Thanks
  10. elliskev2

    1970 Runner sail panel install

    Thank you. I checked it out a little closer tonight and found where it fastens in. I think I got it. :thumbsup:
  11. elliskev2

    1970 Runner sail panel install

    Thank you. I checked it out a little closer tonight and found where it fastens in. I think I got it. :thumbsup:
  12. elliskev2

    1970 Runner sail panel install

    Hello everyone, I am installing my first headliner into my 70 Road Runner. So far so good, but I have been searching the web and message boards for information and photos of how the sail panels are installed. Do the sail panels go behind the headliner for 1970 or in front with the material glued...
  13. elliskev2

    Shifter boot and carpet

    Yes, that is a great idea. I used the soldering iron for all the cuts and holes. Thanks
  14. elliskev2

    Shifter boot and carpet

    Yeah, I was going to jump right in to installing it, then the logic and common sense kicked in...woah hold the pony's. Thanks for the reply.
  15. elliskev2

    Shifter boot and carpet

    Thank you Sir... I figured it should seal to the floor.
  16. elliskev2

    Shifter boot and carpet

    Hello to ALL, I am getting ready to cut in my carpet and was wondering if the rubber shifter boot should be fastened to the floor before the carpet and then the chrome ring. I have been searching and haven't found a discussion on it. Thanks
  17. elliskev2

    Quarter window assembly

    I was wondering what the shield was called because I need to order one for the other side.
  18. elliskev2

    Quarter window assembly

    Thinking maybe something like Fluid Film would work good on the pot metal frame vs. painting. I spent about an hour cleaning the 50yrs of crud off that piece.:usflag:
  19. elliskev2

    Quarter window assembly

    Thank you, thankyou SgtSuperbird!!
  20. elliskev2

    Quarter window assembly

    Hello to everyone, I am cleaning up the rear window mechanism:luvplace: and was wondering what others do when installing the rails, slides and pot metal frame for the quarter glass. Should you just apply some oil to the frame and grease the rails for the guides? It seems painting wouldn't be a...
Back
Top