Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am going through the front suspension on my 67 Satellite. The threads on one of the LCA pivot shafts looked a bit boogered so I bought new ones from Mancini Racing, p/n MRE2808579. I went to install the. Bushings today and ran into a problem.
Pressing the bushing onto the shaft is usually...
A little background...I bought a 'G-code' (383 2bbl) 67 Satellite convertible in the early '90's with about 90k miles on it. Previous owner (#2) only had it a short time and was over his head doing a brake swap. I got it running/driving and kept it for a few years as a long-term project before...
Does anyone know what the factory specs are for front/rear ride height for a 67 Satellite 383 auto? I am getting ready to re-do the front suspension on mine and am considering replacing the original t-bars (778/779) and the rear leafs, but would like to compare its current height to the spec...
Anyone coming to to the Daytona Turkey Run this year? 50th annual show and it looks like it will be a big turnout.
Drove up this morning. Car ran smooth with no issues cruising around 80 mph. Went by the track for a bit to get registered and eat lunch. Was surprised by how busy it was. Don't...
Took my Satellite out for a drive last weekend. Accelerated quickly pulling out of my neighborhood while making a left onto a 4-lane divided highway. Heard a clunk and looked down to see my Autometer water temp gauge laying on the console. It was still working, but had separated from the bezel...
Pair of NOS taillight lenses for a 67 Belvedere station wagon in original boxes. Boxes are aged, but the lenses look perfect. Passenger side lens has the foam gasket. Gasket is missing from driver’s side.
Asking $100 OBO plus shipping from 33418.
Anyone know what the original finish or paint color was on the front sway bar and brackets? I don't have any specific pictures of mine before it was cleaned and painted black, but can see it in some of the teardown photos and it looks black-ish. I also picked up another original sway bar with...
I am looking for a pair of OEM-style front sway bar brackets that mount the bar to the K-frame. These hold the triangular shaped bushings shown below. I couldn't find OEM-style bushings when I restored my car over 30 yrs ago so I cut off the original brackets and used an aftermarket setup...
Looking for input on whether to try to repair my 25 yr old Craftsman (DeVilbuss) air compressor. It is a 3.5 hp 25 gal unit. Today it ate the new fan cage I put on it less than a year ago after it ate the original and I have only used it a dozen times or so since. The retaining screw was still...
We were jolted out of bed about 3:15am this morning by a flash bright enough to see even though we were sleeping and a huge BOOM. Lightning had struck somewhere very close. Power was out, but it turned out to be just our bedroom. The power surge tripped the breaker. House looked ok and no...
One of my previous cars, a Belvedere II Hdtp, had several extra build sheets. PM me with proof of ownership if you own any of these cars and I will send you the build sheet.
Belvedere II Hdtp
RH23F77111786
Belvedere II 4-dr Silver Special
RH41F77172354
Coronet 500
WP23H77209977
One more...
Researching radiator p/n's in my parts book for another thread, I noticed that it only lists 26" radiators for 426 and 440 applications. I never knew that, but assume it is correct. Can anyone confirm? I'm interested to know in case i should hang on to my bb 22" radiator. Thanks.
Does anyone know if the trim that goes down the side and across the bottom of the dash is chrome or stainless? Trying to determine whether it can be polished or if it has to be replated. Thanks.
Hi all. I actually joined the site a few years ago while researching some kind of issue on my 1967 Satellite, but never took the time to introduce myself or post anything. I recently added a garage with post-restoration photos of my Satellite and will be adding more garages/photos soon with...