• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: RHW2
  • Order by date
  1. RHW2

    SOLD OEM 12 Point Strut Rod Nuts to The Lower Control Arm. Early To Mid 60's Cars.

    Good morning, I'm interested in buying a pair of the 12 pt strut rod nuts. My zip is 43021. Thanks... Mike
  2. RHW2

    64 Belvedere grille screws

    Good afternoon, I'm getting ready to install the complete front grille and I'm trying to find someone who's either selling a kit with all the screws, bolts, clips etc. Or if someone knows the screw, bolt, clip type and would share that info I would appreciate it. Thanks, Mike
  3. RHW2

    Grille screws, bolts, clips

    Good afternoon, I have a 64 Belvedere and I'm putting the complete front grille on the car. I'm trying to either find someone selling the complete kit or if someone knows what screws, bolts and U clip nut are used I would appreciate the info. Thanks in advance, Mike
  4. RHW2

    headlight buckets

    I have a 64 Belvedere.... does anyone know if the headlight buckets (hi & low beam) from any other year Mopar interchange with a 64 b body? Thanks in advance...
  5. RHW2

    Hemi velocity stacks

    Good afternoon, I'm looking for info on the Hemi velocity stacks. Specifically the base diameter (will it fit a 5 1/8" carb), the height from the base to the lip (both stacks) and the diameter of the top. Thanks in advance.... Mike
  6. RHW2

    Headers vs Max Wedge Swoops

    The P (primary) is the main jets... S is the secondary
  7. RHW2

    Headers vs Max Wedge Swoops

    Sorry for the slow response....I have the Indy SR heads I used a FAST a/f fuel meter with dual O2 sensors (pic below). One in each header collector. I started out .098 P jets and .095 S jets with 70-52 rods. A/F was 12.8 idle 12.6 part throttle 12.4 wot. I ended up with .092 P jets .077 S...
  8. RHW2

    Headers vs Max Wedge Swoops

    I retired in 08 after almost 33 yrs as a Master Chief.... did you run any carbs other than Holleys? If you get a chance could you take a few pictures of the linkage.
  9. RHW2

    Headers vs Max Wedge Swoops

    Thanks for your reply.... I was wondering about the extra heat. I do have a couple questions.... how did you get Holley carbs to work? I tried but I couldn't get the linkage set up correctly. And with a name like moparsquid you must have spent time in the Navy....
  10. RHW2

    Steelies

    Ok, thanks
  11. RHW2

    Headers vs Max Wedge Swoops

    I'll have to dig out the cam card but it is a Comp Cam Xtreme Energy roller
  12. RHW2

    Headers vs Max Wedge Swoops

    ABSOLUTELY.... LOL
  13. RHW2

    Steelies

    Frank, Will these hub caps fit your centers? Thanks, Mike
  14. RHW2

    Headers vs Max Wedge Swoops

    Yeah the kool factor would be my reason as well. Where did you find the flange that bolts to the manifolds?
  15. RHW2

    Headers vs Max Wedge Swoops

    Thanks... mine dynoed at 558hp 571tq at the wheels. 496 stroker full roller 11.5 to 1.... actually a 440 block with Indy SR Max Wedge heads A & A Transmissions cross ram with 650cfm Edelbrock AVS Thunder 2s... I'll have to find out if Mancini's Max Wedge exhaust manifolds fit my heads
  16. RHW2

    Headers vs Max Wedge Swoops

    Other than just the kool factor... lol
  17. RHW2

    Headers vs Max Wedge Swoops

    Thanks for the video... very informative. Not giving up much with Max Wedge manifolds hp & tq wise. Only down side appears to be additional weight
  18. RHW2

    Headers vs Max Wedge Swoops

    Has anyone ever done a horsepower comparison between headers and "swoop" exhaust manifolds. Thinking of pulling my TTi headers and putting Max Wedge manifolds on but don't want to give up a bunch of hp to do it. I do understand that the numbers may be different based on motor combination, but...
  19. RHW2

    10" poverty hub caps

    Anybody have a source for the 10" poverty caps that were on 64 Belvedere steel wheels? TIA
  20. RHW2

    Painting the dash

    Thanks for the info
Back
Top