Search results for query: *

Good afternoon, I'm getting ready to install the complete front grille and I'm trying to find someone who's either selling a kit with all the screws, bolts, clips etc. Or if someone knows the screw, bolt, clip type and would share that info I would appreciate it. Thanks, Mike

Good afternoon, I have a 64 Belvedere and I'm putting the complete front grille on the car. I'm trying to either find someone selling the complete kit or if someone knows what screws, bolts and U clip nut are used I would appreciate the info. Thanks in advance, Mike

I have a 64 Belvedere.... does anyone know if the headlight buckets (hi & low beam) from any other year Mopar interchange with a 64 b body? Thanks in advance...

Good afternoon, I'm looking for info on the Hemi velocity stacks. Specifically the base diameter (will it fit a 5 1/8" carb), the height from the base to the lip (both stacks) and the diameter of the top. Thanks in advance.... Mike

Has anyone ever done a horsepower comparison between headers and "swoop" exhaust manifolds. Thinking of pulling my TTi headers and putting Max Wedge manifolds on but don't want to give up a bunch of hp to do it. I do understand that the numbers may be different based on motor combination, but...

Anybody have a source for the 10" poverty caps that were on 64 Belvedere steel wheels? TIA

I'm planning on painting the dash on my 64 Belvedere and am having trouble locating any info on how to remove it. Anyone here removed theirs and can share some advice? I've had the cluster out and also installed a new under dash harness but now it time to repaint. Thanks in advance....

I'm looking for a company that sells the old style steel wheels. I've got a 64 Belvedere and currently have Weld Prostar wheels all the way around. On the back I'm running 30 x 12.5 x 15 ET Street SS so I'm thinking 9" or 10" wide with the correct back spacing should work. Also, has anyone had...

I have the radiator pictured below and plan on having it recorded. I understand it's out of a 65 C body.... I have a 64 Belvedere and it came with this radiator (but no shrould) so I know it fits. My question is where can I buy the shroud and mounting bracket kit? Thanks in advance for your...

I have a 64 Belvedere and I want to upgrade to LED bulbs. I have the GTR Lighting Carbide 2.0 from Headlight Revolutions in the tail light and they're amazing. The attached picture is of both sides on marker light, incredibly bright on brake lights.... anyway, I tried to install the same bulbs...

Has anyone swapped out the 22" core support for a 26" core support? If so details..... I can't seem to get my 64 to run under 210°. I've got a Griffin Radiator with the dual electric fans, a 180° thermostat, non hi-flo water pump. Details on the motor....440 .030 over, 11.2 :1, stroker crank...

I have a 64 Plymouth Belvedere Max Wedge clone.... 496 stroker. What I would like to do either swap out my gas tank to a tank that has the pump in-tank or get a drop in electric pump/sending unit that doesn't require stock tank modification. May go EFI in the future. Thanks in advance

about my car....64 Belvedere with a 496 11.5-1 A&A Cross Ram Edelbrock AVS2 Comp hyd roller cam(can't remember the exact specs off hand something like 540 lift and 312 duration) roller rockers. Standard flow water pump (crank and water pump pulley are the same size) 180 stat Griffin alum...

Has anyone put Holley carbs on a Max Wedge? I plan on using a pair of 660s on my 496 Max Wedge.....what I need to know is will the stock linkage work? It looks like it should but what about where the throttle rods attach to the carb, does someone sell the "attachment piece"? Also, it looks like...

Help....I'm almost at wits end with this oil leak. Here's what I've got....64 Belvedere 73 RB block with Indy EZ-1 Max Wedge heads, cross ram intake basically a Max wedge clone. My problem is that I've got a pretty good oil leak between the front corners of the block and the oil pan. There's...

I have a 64 Belvedere and I've been unable to find replacement hood hinges. I can find used hinges but I'm concerned that they would be no better than what I already have. I've even looked for billet hinges with no success....I would rather stay stock if possible. Thanks in advance for any help...

Hello, I'm building a 64 Belvedere max wedge clone and my question is: I'm using a 73 RB with Indy EZ-1 heads and a 64 Max Wedge intake, when I set the intake in between the heads there's about 1/2" or so gap at either end under the intake. Is this correct and is a valley cover the solution...

THE REAL MACOY a 63/64 factory max wedge cross ram intake. The part number on the intake is: 2402726-1 I don't have a picture with the part number to upload but I will have one soon. The carbs are included in the deal, I believe they are Carter 750 cfm. Asking price is $2875.00 OBO. I'm not a...

hi all, I've got a 64 Belvedere and I'm getting ready to replace the rear tires.....a little background info first. Rear is a Strange S60 (Dana) with CalTrac suspension, split mono-leaf. It looks like the spring has been moved inward about an inch. The tires that are currently on the rear...

I've spent quite a bit of time reading through pages of threads that deal with electrical issues and alternators but I can't seem to find a thread that gives the answer I need. I've got a 64 Belvedere with the stock alternator I will be upgrading to the Powermaster internally regulated 140 amp...