Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys, I'm looking for a nice OEM set of wheel well trim for my 68 Charger. I bought a set from Year One and the fronts are decent but the rears aren't even close. I'd like a whole set of 4 if possible but I need the rears for sure. Thanks!
Chris
Hey guys, I'm wondering what the code on the broadcast sheet would be for a white R/T stripe on a 68 Charger. My fender tag has a 7 under the S but I don't have the build sheet so I'm just wanting to know what that code would be on the sheet. Thanks!
Hey guys, I have a RH fender for a '69 Charger and the bracket that ties it into the core support that the hood bumper screws into is missing. Just wondering if anyone has one of these brackets laying around. I've attached a picture for reference. Thanks!
Hey guys, when the time comes, I’m going to be installing the engine into my ‘68 Charger from the bottom. Engine setup is a 440/727 with TTI headers. Can the engine be installed with the headers on or do I have to put them in afterwards? Thanks
Hey guys, I’ve been reading a bunch of threads on here lately about the crappy aftermarket fuel pump pushrods. I have my 440 torn down for a rebuild and I bought a Comp Cams pushrod, which now I’m thinking isn’t a good idea to use. Does anyone have a nice original or possibly even an NOS pushrod...
Hey guys, I'm looking for a set of original 14x5.5 steel wheels that would have come on a 68-69 B body. I'm not worried about date codes or anything, just as long as they aren't bent up or horribly rusted/pitted. Thanks!
Hey guys, I’m looking for the correct bolt for the master cylinder lid hold down bolt for a drum brake master cylinder. It’s a 1/4-20 x 1” hex bolt with the “H” marking on the head. It’s the same marking as the OEM head bolts have. Thanks!
I've been trying for the last few days to get ahold of them. I've been calling twice a day and left a couple of messages with no answer. It goes to a voicemail message and their website says they are still open during the pandemic, so I don't believe that they are closed down. I've heard really...
Hey guys, I’ve been doing some research on cars that got the red painted brake drum faces and one thing that seems to be sporadic is when this process actually started. I have heard anything from 2/1968 to 8/1969. I’m just wondering if it would be correct for my April built 1968 Charger. Has...
Hey guys, every once in a while I see something about a wedge shaped gasket that went under the door mirrors on certain cars. Does anyone know which specific cars got them? We're they used on both sides or just the passenger side if optioned? I'm just wondering if my '68 Charger should have one...
Hey guys, I was out in the garage earlier looking over the block for my '68 Charger. The block is the original matching numbers block and I'm a bit confused on some of the numbers. On the front pad by the intake it is stamped:
D 440 HP 410. Now from what I understand the 410 is the date code...
Hey guys, this is a long shot but I'm looking for a correct transmission for my car. I'm looking for a 1968 727 that's for a 440HP car with a casting number of PK2801541. Thanks!
Hey guys I'm working on the trunk lid and Dutchman panel on my 68 Charger and I'm a little stuck. I replaced the quarter panels and I removed the original Dutchman to make the quarter replacement easier and I also fixed a couple of holes in the rear window channel on the Dutchman. I then...
Hey guys, I installed new floor pans on my 68 Charger and I need to know the locations of a couple of things. First off, I need a measurement for the location of the speedometer cable bracket. The second thing that I need is the location of the holes for the gas pedal mounting studs. My original...
Looking for a nice set of rear brake drums for a ‘68 Charger R/T. I have my originals but one is split around the edge, so I need at least one, but prefer a nice matching set. Thanks.
Hey guys, I’m looking for a nice cross bar that ties the front bumper brackets together on my ‘68 Charger. My original is pretty pitted and I want to powder coat it, so I need a nice original pit free piece since I won’t be able to fill the pits prior to coating. Thanks
Hey guys, I have the bumper jack for my '68 Charger disassembled for restoration. I know that the mechanism itself is grey but I'm wondering about the mast itself. I see that it's a dull silver but I can't tell if it was originally painted a flat silver from the factory or if it's plated in a...