Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi have a new set of power forged l2315 .040 pistons. They are for a stock stroked 383 Chrysler with a .040 over bore. These pistons are on par with the stock 383 hp pistons compression height of 1.92. Great piston for your high performance build, forged pistons with the coated skirts. I have a...
I have a new set of speed pro l2266 forged pistons for a 440. I have a set in .030 and .040 oversized. These pistons have the coated skirts with a compression height of 1.991. Great pistons for forces induction applications. With stock uncut open chamber heads your looking at about 9:1 with the...
I have a new set of speedpro h116cp .030 pistons. These are the high compression slugs with a 1.660 compression height. They are the hypereutectic variety with the coated skirts. Includes pins and locks. These will bring the compression up and easy to shave a little off the deck to zero deck...
This is a set of .030 over bored 440 pistons correct for a 66 to 69 440. They have a higher compression Height then the later pistons (lower compression height than a 440 six pack pistons) for a increase in compression. Great for a upgrade for your low compression 440. Cast piston with pens...
Hi y'all I have a new set of sealed power/speed pro forged Pistons for a 440. They are for a .030 over 440, with new pens. They look alot like the six pack pistons but with the coated skirts. They are great high performance pistons they will really crank up the compression. $375 shipped in the...
I have a brand new Eagle 4.15" forged crankshaft for a 440. The rod journals are for 2.20" which you can run the big block Chevy rods. This crankshaft can make a 440 to a 500. $600 plus shipping from 29464
Has anyone ever used the Flowtech Headers 91945FLT on a 73 and up b body do they fit well. Maybe easier to install than the long tube headers? Especially with the routing of the column shifter linkage!
Hey I have been restoring my 1974 Dodge charger se for 5 years now. I'm at the phase when I want to detail the engine compartment. I am hoping you fellows could help me out in showing me the locations of all the decals in the engine compartment. It does have to be exact measurements, thanks
Does anyone know who makes or sales a side gear for the 8.25 sure grip cone type. Is the side gear from a open diff the same diameter, I was thinking of just milling the back side of the open diff side gear, not sure if anyone knows about it before I buy one.