Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
572 Hemi. Less than 100 passes total. KB Raised cam Alum block. Stage V heads ported by MCH. Callies 4.5 crank, Oliver Billet 7.10 rods, CP 15:1 pistons/Trend pins. T&D rocker system. Crower lifters. Jesel belt drive. Stage V alum valve covers. ARP head and main studs. Went 8.70's in...
If you're contemplating putting a cam and lifters in it, at least pull all 4 MDS solenoids and look at the bottom of them. They have magnets and will hold a ton of garbage if the system is contaminated.
I dont condone it-but alot of people with both the hemis and LS stuff just slam new cam...
09-15 Are the most frequent offenders. I have done 6 motors in the past 3-4 months. My wifes 11' Jeep actually spun a cam bearing and wrecked the block(140k).
I am religous on oil changes and changed hers with Mobil 1 at 3500-4k. I recently did a 14' Ram which that guy used Valvoline...
Strange S-60. A body width(57.5” axle/axle). New 4.10 gears, new 35 spline spool and 1350 yoke. All new bearings, and new 35 spline axles with 5x4.5bp with 3” screw in studs. New Moser aluminum girdle.
$1600 plus shipping. I’ll crate for free. Thanks FBBO.
62-65 Pieces
L/R outer door handles
Front window cranks
Interior door handle pulls
Armrest bases-15"
Everything used in good shape. Some putting on the interior handles and scratches on top of the door handles. Bases have been painted silver and are a little dull. $100 obo for everything or...
Yes you can run NSS and Stick, just have to pay the appropriate entry for each.
They started allowing camping I believe last year or the year before. The Nats website has more info on that than I know. Look forward to racing with yah!
(2) Ford 9" rear housings. Media blasted, back braced with fill/drain bungs added. Mopar billet ends, or ford. I can narrow to your spec and fixture weld. Brackets, spring perches can be welded for no additional cost.
Each housing/brace/bungs/perches/ends $400 OBO plus shipping...
The 2016 Stickshift Challenge will again be Aug 12-14 this year at the Mopar Nationals, as always. A big Thank You to Brewers Performance for stepping up again this year.
Similar to years past Aug 12(Fri) will be time trials, and the Challenge ran on Saturday.
Two time trials saturday morning...
Individual connecting rod bookend, or piston/rod combo. The backs are painted with textured black non slip finish. The rest is left bare and clear coated.
Rod bookend $30
Piston/Rod bookend $40
Each is plus shipping. Can package together to save $ etc. thanks FBBO. Pm me on the board.
Modified early B body cross member. Tow hooks and reinforced steering mount. Blasted, jig welded inside seams, boxed and outer flanges trimmed and welded. Pic is bare metal but it's gloss black base/clear. $350 plus shipping.
Located SW MI
Thanks FBBO.
Don't be surprised if your told not to worry until they twist 2-1/2 splines. My 35 splines in a hard leaving heavy 4 speed car twisted about one spline and haven't changed in 6 years. Pretty common to be told from moser, strange etc.
You probably won't be lucky enough to get them in if you...