Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
572 Hemi. Less than 100 passes total. KB Raised cam Alum block. Stage V heads ported by MCH. Callies 4.5 crank, Oliver Billet 7.10 rods, CP 15:1 pistons/Trend pins. T&D rocker system. Crower lifters. Jesel belt drive. Stage V alum valve covers. ARP head and main studs. Went 8.70's in...
Strange S-60. A body width(57.5” axle/axle). New 4.10 gears, new 35 spline spool and 1350 yoke. All new bearings, and new 35 spline axles with 5x4.5bp with 3” screw in studs. New Moser aluminum girdle.
$1600 plus shipping. I’ll crate for free. Thanks FBBO.
62-65 Pieces
L/R outer door handles
Front window cranks
Interior door handle pulls
Armrest bases-15"
Everything used in good shape. Some putting on the interior handles and scratches on top of the door handles. Bases have been painted silver and are a little dull. $100 obo for everything or...
(2) Ford 9" rear housings. Media blasted, back braced with fill/drain bungs added. Mopar billet ends, or ford. I can narrow to your spec and fixture weld. Brackets, spring perches can be welded for no additional cost.
Each housing/brace/bungs/perches/ends $400 OBO plus shipping...
The 2016 Stickshift Challenge will again be Aug 12-14 this year at the Mopar Nationals, as always. A big Thank You to Brewers Performance for stepping up again this year.
Similar to years past Aug 12(Fri) will be time trials, and the Challenge ran on Saturday.
Two time trials saturday morning...
Individual connecting rod bookend, or piston/rod combo. The backs are painted with textured black non slip finish. The rest is left bare and clear coated.
Rod bookend $30
Piston/Rod bookend $40
Each is plus shipping. Can package together to save $ etc. thanks FBBO. Pm me on the board.
Modified early B body cross member. Tow hooks and reinforced steering mount. Blasted, jig welded inside seams, boxed and outer flanges trimmed and welded. Pic is bare metal but it's gloss black base/clear. $350 plus shipping.
Located SW MI
Thanks FBBO.
Ford 9"
A body width
Backbraced large web housing.
3"x.250 axle tubes.
Fully jig welded
New 35 Spline axles and lightweight steel spool.
All new Timken bearings and crush sleeve eliminator.
New T6 3.25 Aluminum carrier with thru bolt 7075 caps.
Aluminum pinion support.
1350 Billet yoke...
Dana 60
A body width
4.10 gears and 35 spline spool.
Billet 1350 yoke.
Billet housing ends.
New 35 spline BBP axles, screw in studs, green bearings.
Calvert HD perches to your spec.
Everything new but housing.
Uses std 2.5 offset 11" drum or aftermarket disc brakes.
It is a truck housing. Not...
Dana 60 A body length. Narrowed truck housing, not the HD one. New 35 spline axles, new spool, bearings. Billet 1350 yoke, and billet housing ends. 4:10 gears. Perches are loose, no brakes. 5x4.5 pattern. Never run. Perches can be welded to your spec. $1000 OBO
Can bring to the Nats or Mopars...
I did a jeep disc conversion on the rear of the car when we put it together, but used all oe drum on the front. Kinda sucked stopping wise so I ordered a kit from doctordiff.com and finally did the swap.
Man what a breeze. Everything in the front of our car is new, less than 500 miles so it...
It's a long ways away, but its a long snowy winter.
Aug 8-10 2014
2014 Mopar Nationals Stickshift Challenge
Winner $1000
R/U $400
Semis $100
$100 to the driver if there is a factory trans car in the final.
Brewer's Performance will be coming on board. One of the best and most...
September 13-15 in Norwalk, OH.
Similar rules as always. Two steps ok, no hydraulic or electric activated clutch releases, no Lencos or Clutchless crap.
Winner-$1000
R/U-$300
Semis-$75
Cash Payout!
The race will be raced Saturday. Just buy entry to any of the listed classes and...
August 9-11 2013.
Stick shift class is happening! I do not have all the details but expect it to be much like years past with elims on Saturday.
http://www.moparnats.org/ParticipantInfo.htm
Should be alot of Fun.
Payouts
Winner $1000
R/U $300
Semis $75
Best RT in Elims - Come see...
1965 Plymouth Satellite console. Includes shifter, wiring, lights, old aftermarket tach (?working), and what you see in the pics.
There is no knob, or cable. The armrest has some cracks, chrome has some pitting havent tried to polish it
$300 plus shipping (around $30 to the lower 48)...
What are you running, how do you like it etc??? I keep looking at the sportsman model but worry some about not maybe doing all I want I guess.
Going to be used with Msd 7530 for me.
Shock travel
Rpm
Oil pressure
Input shaft (4 speed)
Water
Maybe fuel press
Driveshaft etc etc...
Hey guys just curious what your doing in the thermostat dept. Right now on my alum head BB I have a be cool rad, csr electric pump and a small dual fan setup with no thermostat.
At the Nats it wanted to run hot, 200-210, range and had a little difficulty getting it to cool quicker. I'm...
55" Axle flange to axle flange, 50" housing width.
Excellent newer 3.73 gears.
New trak-lok posi 35 spline, never run
New 35 spline axles with new green bearings
All new bearings/races/seals
Steel cover with new gasket.
11" Brakes with new cylinders/shoes/hardware/drums
Add fluid and hook...