Search results for query: *

Hi All. I have a 68 Bee. I want to allow fresh air into the engine. I am looking to cut the blacked out parts on the Hockey Stick hood ornaments and some of the hood material under the hockey stick. I am looking to use the center section of the N96 setup in order to get a seal to the oval air...

Do you guys recommend standard or heavy duty springs? Its a 68 SuperBee 383. I want it to be a comfortable ride. I am adding the 1inch lift. Normal cruising around town and highway. Not drag racing or towing.

ESPO quoted me a new set with an added leaf (+1inch lift from stock) for about $300 (+shipping), dont have to swap the front hangers. A local shop also quoted 300 to add a leaf to my existing springs. Sounds like a new set is the better choice.

Hi All. Happy New Year. Looking to raise the rear end on my 68 SuperBee, 383 car. Will the SS leaf springs fit in or do I need to swap out the front mounts? I was told the SS springs are shorter and require the front mounts to be replaced. I am pricing$$ out adding a leaf VS. new SS springs...

Photos provided by oldbee. Thanks Jeff!

Thanks Aarons Air! That is where i got the attached picture from. Unfortunately there is not enough info on this post.

Hi yall. I'm getting ready to apply the Superbee stripe to my 68 Bee. I have not been able to find any good documents as to where the stripe is placed exactly. Can someone please provide measurements to this drawing for the tailpanel bee. Also need some measurements for the quarter panel Bee...

Hi all. I have a 68 coronet with the standard steering wheel. Will the wood grain steering wheel bolt right in or would I need other parts? Thanks.

Wow. Nice work moparnation74! Thanks.

Hey moparnation74 these forums are to try and help each other out. Please correct the above list and help us out.

Found this in a different post. Mopar Chassis Color Chart Legend: BC: Body Color GB: Gloss Black SB: Semi-gloss Black CI: Cast Iron Gray N: Natural Steel or Aluminum MP: Manganese Phosphate CC: Color Code (*): Some Mopar core supports are body color with semi-gloss black sprayed on the...

Hi All. I'm restoring a 68 SuperBee. Getting ready to paint the drive shaft except I am not sure what color it was from the factory. It also has an 8.75 rear end. What color was the axle and pumpkin drop-out? Thanks.

Hi all. I am having trouble finding a formed upper radiator hose for my 68 Coronet. 383/4speed. Napa has 2 options and neither fit. Did 68 have a formed hose or did they use a flex hose for the upper? I found a formed hose for the lower. Thanks.

Does the Saginaw pump use power steering fluid or ATF?

Moog K7026. This kit has the sleeves and retainers molded into the rubber bushing. Fit ok. Car will be on the road in a month or so.

Which clutch is preffered for a street car? 383/4speed. No AC.

Hi All. What is the difference between AC vs Non-AC fan clutch? I also noticed "Centrifugal" vs "Thermostatic". Thanks for your input!

Hi all. I have a question about my power steering pump belt and pulleys. The belt fits perfectly on the crank pulley but is a little big on the power steering pump pulley. Do I have the wrong pump? Its a Saginaw with the oval neck. Maybe someone swapped it back in the day and it worked ok? The...

Trying this Moog kit K7026. Should be here tomorrow. K7016A is not a complete kit.

Hi All. I found this diagram in the service manual. I cant find a rubber kit that comes with the sleeves. Can i buy them separately? Do I need the sleeve? I thought the Moog kit would come but it does not.