Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok here is another one! got a 72 challenger, with the car running and the turn signals on in either direction the tach jumps with each bulb flash. so if its idle is at 1k each bulb flash the tach jumps down to 500 ... also if the radio is on each time the turn signal is initially activated it...
Ok, so i normally dont ask for much but i'm having trouble with this superbird. 440-6, running very rich, wont hold an idle ... when it does idle it stalls when put in gear. Just went through all 3 carbs, car has been sitting for 2.5yrs, they were nice and gummed up! anyway, timing is at 15...
Need a fuel vapor separator for a 440/6 superbird. Any quality new ones available? I only ask this because I've read some of the new ones have been found to have no screen inside!
@Crackedback , just posted this over on FABO ... it's worth a re-post! ..just wanted to give thanks where it's due....ordered another headlamp harness, this time for a customer's '71 Cuda. Harness was shipped promptly and arrived coast to coast in 4 days flat! If anyone is on the fence with...
How fast does your engines start? Please also list ignition system and whether carb/injected..
I ask this because I just had 2 customer vehicles in my shop, one was a '34 Ford with a SBC and the other was an '85 GMC again with a SBC....one had edelbrock the other holley, one had MSD and the...
Ok what the hell? I posted an army commercial video of USA vs Russia and it was deleted due to "political post outside of political forum" .... seriously? Who's running this show now? There is nothing political about that, it was 2 military commercials! Looks like we've gone soft folks......
About to install my new TTI exhaust and I have to install a pass side muffler hanger bracket. Anyone that's done this before have pictures? Was hoping to find a template but finding nothing. Last thing I want to do is drill 4 holes in the wrong place!
Anyone else have trouble with them? I'm starting to doubt their customer service.....So.....I ordered full exhaust for 68 coronet early February (headers to tips). EVERYTHING was in stock they just had to send the headers out for coating because I wanted them in black, that would take 4-6...
I'm in need of another set of headers for my 383. I have 2 sets of TTI already and they're great, but aren't cheap. I was on dougs website and saw their specs are pretty much identical to TTI's but less than half the price..just curious how the fitment is on these, any clearance issues? Easy...
Just installed a Hurst/ inland conversion mechanism on a 67 charger. The shifter handle taps the console when shifting into 2nd and 4th... I've already shimmed the back 2 bolts of the shifter and it helped but still lightly touches.... anyone else run into this?
Working on a customer's car, 67 charger 383 4spd..mopar electronic ignition conversion.. would not start, crank but no spark. Verified ignition voltage at the ballast and positive terminal on coil. Verified reluctor gap...verified resistance through the distributor pickup....verified cranking...
Removed this to replace with a Lokar setup. In perfect working order. Been on the car for under 3 years. Comes with everything needed. I haven't been happy with this kit since day 1, just never liked it but it does work and the kickdown cable is pretty nice. Very easy adjustment.
**the...
Got my Lokar stuff in the mail today and on the car it went. I must say, I should've bought this instead of that bouchillon junk. Looks much cleaner, individual cable adjustment is great and the throttle is much "lighter"...... yes I know, I still need to remove the old throttle return spring...