Search results for query: *

Wondering if anyone has a complete set of kickdown down linkage for a 69 coronet 383/727?

Hey everyone, just wanted to let you know I’ll be heading through Tucson tomorrow hopefully mid morning headed towards San Diego. I have a U-Haul 10 foot box truck that’s pretty much empty if anyone has anything they need taken to San Diego. A small donation would be appreciated.

Putting a one wire internally regulated alternator in my car. 69 super B. I know it only needs a battery wire hooked up. Can I hook the battery wire from the original wiring harness to it for this purpose? Looks like there are two wires on the battery connector.

Hey everyone, just just getting ready to reinstall my dash. Wanted to know if anyone could guide me on how to do a basic electrical test to make sure all the lights work and basic things like that? It’s on a 69 super bee with a rally Dash

I’m putting my front and back together in bagged all the bolts for the front fenders. I forget what the longer bolts go to. Can someone please help? I think there are maybe four of these longer ones.

Looking at the site to attach throttle cable and realizing it’s not correct. I remember on one other carburetor when I ordered they asked me if I wanted it set up for Mopar or what brand. Is there a way to make this one work or do I need to change something? I do have throttle linkage for...

What am I missing here? I have looked up in my manuals to make sure it’s hooked up correctly. Cannot figure out why the top of the tire rod is hitting the torsion bar.

Rewiring my dash. Missing a couple of the twist in bulb sockets which I can get but I’m wondering which type of sockets go into the turn signal indicators the speedo the clock in the basic – wiring as well as the brake system light?

Working on my dash. There’s this piece that screws onto the backside of the headlight switch. Looks like I am missing something here. Any input would help.

Hey guys just received my wizard radiator. Definitely fits with the electric fans and everything looks great except that even on this radiator the lower driver side bolt hole is not lining up. It’s actually in the exact same position that happens to fall on the cold case radiator where the outer...

Hey everyone, I’m back with more questions. Last night I sat down for an hour or two with each of the different wiring harness is. Had my wiring diagrams and was able to go through and label 95% of things. There’s a couple wires on the DASH harness that are cut. (A red, brown, dark blue/white...

Running a 360 engine in a newer Mopar. The EGR valve is good but the port on the intake is clogged. Does anyone have any good advice on how to unclog this? Or has anyone done this and have advice on how difficult it is?

So I just bought a mini starter that was recommended. It fits into the transmission great except that when the nose cone piece fits into the small area inside the transmission it doesn’t allow the bolt holes to lineup. I’m wondering if I shave some of that nosecone piece off of the starter so it...

I’ve tried twice now with two failures. The first time I ordered Moog U joints they were in correct because the company selling them had them listed wrong in their catalog. They returned these no problem. They looked up and found the second set of Moog which are Moog #317. Those arrived and no...

Getting lots of stuff back on the car. I tagged and bagged most things pretty well but I’m coming across a couple pieces I can’t find in any of my photo library and they’re not tagged. I have two of my heater hose holders in the car already. Wondering where this goes or if it was just extra.

383 auto, no a/c(did have aftermarket a/c) power steering. Trying to figure out which belts to get. I bought two tonight. Put one on the alternator but then realized the belt for the power steering pulley lines up with the same pulley as the alternator. The alternator does have a dual pulley on...

I am cleaning up and restoring my dash. I replaced the little rectangular electronic piece on the back. I had another member mention that his did not have the condenser. Is this a necessary piece? It is the piece circled in red in the picture. Stock pic. Not my dash.

My son just came up to me and asked me to look at his latest project. He hooked up the speed control from one of his remote control cars to a motor and then made it so that a hot wheels car could sit on top. He pulls the throttle the engine spins which causes the back wheels to spin. I know this...

So I ordered a set of U joints for my 69 Super Bee. Put the information in online, products came up, I ordered them through parts geek, they got here and they don’t fit. Can someone please provide me with the correct information for U joints that fit?

Just got this beautiful new radiator from cold case. I ordered an electric fan because I wanted to do away with the engine fan. Coordinated with them about which set up to use. actually through this site. Radiator is beautiful. looks great! however I go to put the fan shroud on with the electric...