Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks! Yes I want to remove that prop valve on the frame and only use the adjustable. Wilwood also has a nice one. I also find it very annoying that everytime I bleed my brakes I have to crawl under and use that white stopper in place of the switch. Can I use some male/female flex lines to...
Hello, has anyone gutted out that large prop valve and install only an adjustable prop valve that sits under the MC? I’m looking at Baer mc + adjustable valve. It looks like i just need to extend the rear line and reshape the front lines?
I tried putting in the new one, looks the same as the old one but the flange does not sit easily on the top, sounds like it’s hitting the bottom of the tank? Should it sit flush easily?
So I open up a can of worms thinking I had to replace the sender! I removed it already turns out my sender did not have a filter on it. Now how do you hold that gasket in place before tightening! Seems like if that gasket is off a bit major leak!
Hello, i am little confused on how to properly connect the gas tank vent line and 1/4 return line that goes to the separator? WHat i see now is the small port on the sending unit has the fuel cap vent line attached? Should that port be the 1/4 return line? If so where does the fuel cap vent line...
its sounds like from reading it is also a filter but depends on which one i buy? Also i read one of them is not correct? So it is recommended that i buy a line and install the separator?
Hello,
I just purchased the 2 piece hard fuel line to go between the carb and fuel pump for a 70 charger RT 440. I did not realize that i dont have the vapor canister. What i had before was a rubber line from pump to carb no filter. Now what? I dont have a return line either. If i get that...
Thank you for that detailed explanation. I bought a headlight switch with 5 terminals instead of 4 terrminals so im glad i can use the 5 terminal switch
Does anyone know why there are swiches with 4 or 5 terminals? I have 4 on my switch and a space for a 5th in my connector. I see on ebay switches with 4 or 5 terminals for a 68 to 70 charger. What is that 5th terminal for?