• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. E

    FOR SALE Set of 440 LY Connecting Rods

    Up for sale is a set of stock 440 LY connecting rods. Taken from a 1970 low mileage RV motor. $100 plus shipping from SF Bay area.
  2. E

    PVCR Calculation for Six Pack

    Hello, Running a six pack setup, I am a little uncertain on how to compute/estimate my PVCR size. I am familiar with the formula that adds the area of the primary jet to the area of the PVCR to arrive at the suggested area of the secondary jet. The fly in the ointment here is that I am not...
  3. E

    Secondary Metering Plates

    Hello all, I've been slowly refining the tune on my six pack setup on a 493 stroker big block. My question has to do with secondary metering plates. I came across a pair of secondary metering plates that accept screw-in jets, but they don't fit properly. They tend to interfere with the...
  4. E

    Automatic Console Shifter

    Folks, I have a '68 B body with the stock auto shifter mounted in the center console. Just wondering if anybody has replaced this shifter with an aftermarket unit and mated it to the console. The factory shifter has several pivot points = places for slop in the linkage. I might consider...
  5. E

    Cold Case Radiator Hose Size Mismatch

    Hello all, I am using a Cold Case radiator to cool my 493 stroker - works very well BTW. The lower hose is a loose fit on the radiator. The radiator OD is 1 5/8", but the hose ID is 1 3/4". When I bought the radiator I called Cold Case and they indicated the radiator was correct for the...
  6. E

    Borgeson Update

    Hello all, Just a month or so ago I installed a Borgeson power steering box in my '68 B-body. I retained the existing Saginaw power steering pump. The other day the weather allowed me to take it out on an extended cruise up and down a local mountain highway. The steering feel was more...
  7. E

    Borgeson Power Steering Report

    Folks, I just finished installing my new Borgeson power steering box + coupler. I was running a Firm Feel stage II box, which I removed due to a leaking seal. Bottom line - I like the Borgeson unit better. A bit less assist at low speeds, but more precise at speed. There is no on-center...
  8. E

    Power Steering Box Leak

    Hello all, I installed a new Firm Feel power steering box in my '68 B-body a couple years ago. Ever since day one, it has been leaking from the input shaft area. I suspect the mistake I made was to buy the box and let it sit around the shop for at least a year before I filled it and installed...
  9. E

    A727 Torqueflite Shift Points?

    I built a 727 to go behind my 493 stroker and have questions about the resulting shift points. Here's a quick rundown: 1974 Torqueflite entirely rebuilt (my first time) using top quality parts from a very reputable transmission builder. Built to easily handle the ~550 hp of the stroker...
  10. E

    SOLD Big Block Vapor Separator

    For sale is a fuel vapor separator, used on the 440's & hemis. Note this is a proper reproduction, not one of the faulty/incorrect knockoffs. Asking $15 + shipping from Los Gatos, CA.
  11. E

    Carb to intake vacuum leak

    Hello all, I've been working to eliminate a heat soak issue with my six pack setup, recently installed a set of 1/4" phenolic spacers between the carbs and the intake. I am using the 0.030" paper gaskets on both sides of the spacers. So I get the whole thing put together and the idle is too...
  12. E

    Bypass Regulator with Mechanical Fuel Pump?

    Hello, I am presently running a Carter M6903 mechanical pump and a deadhead style regulator on a 550 inch six pack engine. This system is giving me some issues with idle characteristics once the engine heat soaks. I will be installing carb spacers but also looking to run a return line back to...
  13. E

    FOR SALE Exhaust Clamps

    Up for sale are a box of 14 exhaust clamps, 2 1/2". Standard clamps, not stainless. Asking $15 plus shipping.
  14. E

    SOLD Muffler Hangers

    For sale is a pair of muffler hangers, 2 1/4", that fit '68-'70 B bodies. Never installed; asking $40 plus shipping.
  15. E

    FOR SALE Sway Bar End Link Kit

    For sale is a sway bar end link kit, including urethane bushings. Asking $10 plus shipping.
  16. E

    FOR SALE B Body 11 inch Front Disc Parts

    Up for sale is a pair of 11" front disc rotors, bearings, dust shields, slider caliper brackets, and hardware. These parts have maybe 10 miles on them, as I decided to move up to the 11.75" brakes instead. The rotors show no wear or grooves, just a little discoloration from sitting around...
  17. E

    FOR SALE Backup Switch for Console/Automatic Transmission

    For sale is a backup switch for use with a console shifter. Switch works perfectly, but missing the harness connector. Asking $80 plus shipping.
  18. E

    SOLD Lokar 727 Kickdown Cable Kit

    Up for sale is a Lokar kickdown cable kit, P/N XKD-2727HT for the 727 Torqueflite. Asking $70 plus shipping.
  19. E

    FOR SALE 1970 Charger 440 Hood Decal Set

    Up for sale is a pair of '70 Charger 440 hood decals in black. New in box. Asking $25 plus shipping.
  20. E

    SOLD 1968 Coronet Hood

    For sale is a stock '68 Coronet hood. This hood is rust & dent free, with virtually no filler. It has been sandblasted, epoxy primed & painted in '70 sublime single stage. Probably not the color you want, but all this hood needs is a scuff, seal, and shoot whatever color you need. Asking...
Back
Top