Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The kit I purchased for my A body came with the black seal that goes around the shaft, a white bushing that covers where the arm bolts to the car and a grease fitting.
My VR is quite a bit different than the one you suggested moes, here is what I currently have with the only number I could find on the old alternator.
Perhaps my old VR does not work with the new alternator Ive installed? Just want to be sure.
Thanks!
I cleaned the firewall & back of the VR and nothing changed. Im getting 12.84 volts on the battery while the car is off and over 18 when it is running. I installed the alternator in the link from post #2 as suggested and according to the specs it does not have an internal VR from my...
Thanks moes for the reply. Couple questions...
Okay so I check the grounds under the hood especially on the VR, does it have a dedicated ground or ground to the firewall?
Where do I check the volts at idle with my multimeter? How many should I see, I assume this will increase when RPMs go up...
So I replaced the alternator with the one moes suggested, as soon as I started it and gave a little throttle the voltage gauge moved to the right very fast, actually it works more like a tach as the more gas i give it the more the gauge moves, it will go all the way to the right and more!
Any...
He asked me what year the car was, 1967 I replied, he stared at his computer for a bit then said we dont have a listing for that car and asked me if I could find a p/n.
Thanks for the reply moes.
I have a 67 Charger with 383 and my alternator died on me yesterday. Went to Napa this morning and they couldnt find anything in their system. Napa is my only option as they are the only show in town, would anyone know what they could cross reference or a part number perhaps I could give them...
Thanks for the tip 96 but I dont recall me stating any of that in my original post, I asked a question which I thought was rather simple for those who know or could advise on how they have done it.
Im taking the head from a 170 and swapping it to a 225, Im using the rocker arm shaft from the 170 and push rods from the 225 as they are the correct length.
Question, as the rocker shaft Im installing has been set for the 170 rods/lifters will i hurt anything by just bolting it on as is or...
So it seems that no one on this form or anyone I know for that matter has enough money in their mattress to change the ongoing situation in the world so I have a question.
How does one buy shares or stocks (or whatever they are lol) in the patent for the vaccine that Soros (may or may not have)...
Why is everyone so afraid of bondo anyway?
When OE or AMD panels were not available years ago did we not use bondo for repairs such as the OP car requires? Im not dissing your car by any means, I just dont see why everyone is so afraid of a little bondo. When done properly what is the big...