Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a B block cast iron dual point distributor #24444360. The shaft spins freely and there is no wobble. Missing the vacuum advance canister. I can bring to the Indy swap meet in March.
$75.00
I have a RB Steel crank that is STD on both rods and mains. I just had it magged this past weekend and it passed. Machinist says that it will polish up at std no problem. There are a couple of little pits on a couple of the journals that he said would clean up at .010
I can bring to the swap...
I am planning on going to the Indy Trade show on March 4th. I have a set of MW exhaust manifolds that I no longer need. They have been repaired professionally years ago, they have been sitting on a shelf collecting dust ever since, time for a new home. $650.00
I have all of the trim off my 64 and I am finally in the process of putting things back together. Is there a trick (or sequence) to putting the trim back on? To me it looks like the trim at the top of the windshield and the 2 end pieces which tie into the drip rail look an assembly that needs...
Quick question regarding the exterior door locks on a 64 Polara. I can lock the door using the key as it is designed to do. However, when you push the exterior door handle button to test to make sure the door is locked, the door unlocks. Does anyone know if there is a "timing" of the position...
I have run into yet another little set back. I had sent my original 64 Dodge safety latch to be cleaned up an reanodized. I left the parts wrapped up and low and behold the return spring is now broken. I think the chemical process must have weakened the tension in the spring sure enough it is...
During the course of my restoration I cannot find the 2 bolts that hold the safety latch to the hood. Also the spring on the safety latch is broken so I need a new latch. I also need the 2 phillips screws that hold the lever to the hood, the lever that actually releases the main latch . Thanks...
I was at Walmart (I know I know, but can't beat their price on oil) anyhow I see they have the retro fit T12 led lights. The package says works with most ballast setups. My current fixtures were put up about 6 yrs ago.
So I buy the bulbs take them home and install. I have 1 bulb thats brighter...
Quick question for those that are running an oem metal fan shroud on a 22 inch 1964 radiator.
My car doesn't run hot without it, but I'd rather try and pull more air into engine compartment from outside rather than just whipping hot air around.
Question is the square nuts that are mounted in...
Off topic here, but I've tried craigslist with no luck. My Pop has a complete carb to oil pan 472 Caddy motor out of a 69 Coupe Deville that had 98,000 on it plus th400 trans. He originally was going to swap out a sbc in his El Camino and put this in. Well needless to say that will never happen...
I have a brand new Kramer 1964 Dodge max wedge headlight wiring harness that I do not need. Brand new they now cost over $200.00. I'll sell mine $170.00 shipped in the US.
It's a super long story, but I finally got my grill back over the weekend. I had given it to a guy to strip and fix along with "C" trim pieces and hood lip piece. Got the hood lip and "C" pieces back last year, they look great.
The grill bottom portion has been polished but the slats are still...
Before I yank out my dash cluster for a 3rd time, hopefully someone can give me an idea whats going on.
I have a 64 Dodge Polara dash with gauges and clock. I took the entire unit and gas sender to a vendor I found in Hemmings. I had the amp gauge replaced with a volt meter. I bought all new...
Im at the point now in my project where I need to get some input here from you folks.
I orginally was going to run a plain hood on my 64 Dodge. Now I'm second guessing things. I took the car out the other day minus the hood, and even with thermal coated cast iron manifolds the amount of heat is...
I know these clamps are questionable, and I have one on my thermostat housing that keeps on weeping on me. Housing is clean and paint free, no major pitting on metal either. I bought the clamp kit from a reputable dealer, but I wonder if there is a known good brand of corbin clamps, if there is...
I have a working am/fm radio snd dash bezel for a 64 Polara 440 trim. Bezel is not cracked and is a great candidate for rechroming. $300.00 plus shipping.
Im going a different direction now for one of my projects and I have a new stainless steel sender never used, just mocked up on a tank. $60.00 plus shipping
I'm looking for a "good" set of plain 10" dog dish hub caps. I have a set now and my spares are soso, looking for a set that arent dented and scratched up.