• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. M

    Transgo TF2 in A904

    Thank you for your help/advice. The spring went in just fine. Mario
  2. M

    Transgo TF2 in A904

    Thank you for demonstrating. That's what I thought to do. I'll give it a try. Thank you for your time. Gretings from Germany Mario
  3. M

    Transgo TF2 in A904

    Please stop with band strut. There is not a band strut on this rear band design. The adjusting screw is pressing directly on the band. You can see that in the picture. There is no question, to work on the rear servo the tailshaft has to come off. That's also what the Transgo tech support...
  4. M

    Transgo TF2 in A904

    That is how it looks like. It's different from the video above. There is no strut to take out. I contacted Transgo support yesterday. They answered me even on Sunday :). Their technician says in my case with the double wrap band, I have to take the tailshaft off. My question is now, do I really...
  5. M

    Transgo TF2 in A904

    My tyranny is a late 68 A904. There is no band strut on the reverse band/lever. Any further suggestions? There are not many Torqueflite experts over here in Germany.
  6. M

    Transgo TF2 in A904

    Removing the band strut is not listet in the description. I'll give it a try.
  7. M

    Transgo TF2 in A904

    Hello Transmission experts. I have a probably late 1968 A904. I bought a Transgo TF2 and began to install it. Valve body is ready. Now i should change the spring in the rear band servo. I cannot change the spring without removing the tailshaft. Installation manual says if the diameter of the...
  8. M

    Shoulder belt clips

    Hello, I am looking for the .......... Best regards Mario
  9. M

    69 Satellite Rear is too high

    Oh yes, that's a good advice. At what extension level should the rear shocks be?
  10. M

    69 Satellite Rear is too high

    Thank you, I know this sheet. But it won't tell me what I have in my car. I measured again. They are 58" long. They have 5 1/2 leafs. They have Arch of 6,5" and the pack is 1,73" thick. For me the thickness of the pack was the key. I think it's some kind of heavy duty springs. So as the rest...
  11. M

    69 Satellite Rear is too high

    I don't know nothing about the rear springs. I used them because they came with the car. Maybe first thing is to measure them. Overall they are 55,7 inch long. And as I mentioned 5 1/2leafs. What dimensions should original rear springs have?
  12. M

    69 Satellite Rear is too high

    The front is already all the way up. Although I thought many times that it should be a little higher. The tires are 15". In front 235/60-15, in rear 255/60-15. I was expecting the front to come up by itself, as I bring the rear down. Can someone give me the heights front/rear of a roadrunner...
  13. M

    69 Satellite Rear is too high

    Hello, I would appreciate to get some help. Since my restauration is done I was wondering about the height of the car in rear. There are packs of 5 1/2 leaf springs mounted. If my research is right, the 69 with a 318 would originally only have 4 1/2 leaf springs. I don't mind about the springs...
  14. M

    69 Satellite front height

    OK. Thanks for these suggestions. What I will do next is to change lca bushings. Then I will install them like you said, with all wheels on the ground. But I don't understand you saying that ride height is too low. It's not low, I try to be on original height level. But the higher I get, the...
  15. M

    69 Satellite front height

    Hello, I try to tell long story short. After 5 years of restoration my 69 Satellite I finally made it on the road. It's a 318cui with a a904. After doing some hundred kilometers I have some minor problems I want to get rid of. 1st was a leaking water cooler. Got it soldered. Done. 2nd is a...
  16. M

    SOLD 68-69 Plymouth hood emblem

    Hello Steven, would you please send me one of those? Mario
  17. M

    replacement door tag

    Hello, I am trying to find out about the SPD /build date of my car. Big D A12 here in the forum found out what I was thinking already. The car was build 6th or 7th January 1969. In Germany the build date is essential. Now our registration office wants to see the door sticker for the build date...
  18. M

    Lynch road plant

    3658 1 could be OK it's possible that you are right. I was unsure if it's a 3058-1 or a 3658-1. I have the build date from Engine and transmission. Engine is beginning of October 68 and transmission is last day of September. Does that make sense to you? But anyway, how did you get to that...
Back
Top