Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi everybody,
I've been flushing my engine for a few weeks now (putting water in it, going to work and back, draining the water, 5x a week) and it now starts to come out quite clear.
I was wondering when enough is enough and its time add coolant?
Is your coolant as bright and clear as it was...
Hi everybody,
I'm currently running 26inch tall tires and my stall rpm is about 2700 rpm if I were to replace the 26inch tires with 28inch ones would this increase/decrease or have no influence on my stall rpms. Rear end ratio is 3.55.
Thanks in advance!
Gr Marco
Hi everybody,
I've got a question about a holley 4 barrel base plate underneath a impco 425 (LPG mixer) on a 400ci mild street car.
I've been thinking about this for a while now, the impco 425 flows about 460cfm max, now the holley base plate underneath it is a 850cfm (1-3/4 throttle bore) the...
Hi everybody,
Just wanted to swap my oil filter but it turned out my oil pump has smaller threads than a normal filter (3/4-16) anybody knows what thread filter I need? The engine is a '73 400
Hi everybody,
For some reason my 400 (rebuild about 2 years ago) has basicly always around 20psi of oil pressure, it does not matter if the car is hot or cold, high rpm or at idle. It seems to max out at around 22-23 when could and cruise speed and the lowest is at hot idle its around 18-19...
Hi everybody,
Im looking to buy a cheap (universal) bench seat cover for my 1966 belvedere 4d. Im from the Netherlands and nobody over here sells them over here.
The only ones I'm able to find are those truck bench seat covers but these do not have the back part of the seat covered right...
Hello everybody,
I'm a mechatronics engineer from the Netherlands. I'm was wondering if there would be any interest in a multi-gauge which would be able to show the basic (Oil psi&temp, coolant temp, and Volts) values but which could also be able to show you your current ignition timing.
I'm...
Hello everyone,
Two years ago I (cheaply, I'm a student and live in the Netherlands zo parts are about 30% more expensive) rebuilt a Mopar 400ci for my daily driver 1966 Plymouth Belvedere. Main parts I replaced/added are:
Cam: Hydraulic Flat Tappet, Duration @50 212/212, Lift .440/.440...
Hi everybody,
I'm busy rewiring my '66 belvedere and was surprised I couldn't find a (free) colored wiring diagram and took it to myself to make one.
I hope it can help other people rewiring their 66' b-body.
Best Regards,
Marco
Hi everyone,
This may be a weird question but last year me and my dad build an engine for my 1966 Plymouth Belvedere and i was wondering how much power is approximately making. This because I am planning to convert it to LPG (gasoline in the Netherlands is about $6,58 a/gallon, and right now i...
Hello,
My name is Marco and i live in the Netherlands so that's why my english is not the best.
Anyway, i've got a 1966 Plymouth belvedere with a mopar 400ci in it. Stock it seemed to have around 205-250 hp, because it has pretty thick wear ridges i'm planning to bore it 0.02 inch over so i can...