• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: Hamid
  • Order by date
  1. Hamid

    1966 Plymouth Belvedere II horn ring removal

    Well finally I got it out, as you said, I had to twist it in an angle, and it sure don't need a push down, just extra force depends on the horn ring grip to the base. Thanks for the info YY1.
  2. Hamid

    1966 Plymouth tire Jack

    Hi everybody: I am posting a pic of a tire jack, said to be for the 70's, Just want to know if does fit 1966 Plymouth Belvedere. The owner said he don't know. The one that fits 66 Plymouth has a one piece removable hook, not like this which is none removable and it is hinged. I appreciate your...
  3. Hamid

    1966 Plymouth Belvedere II horn ring removal

    I have the same issue of removing the horn ring years ago, I believe I had asked someone in this forum how to remove it and he said to twist with raising one side some like that I cannot remember exactly, kind a little trick. Matter of fact I am trying to remove it now ( for an electric issue)...
  4. Hamid

    273 swap

    Well thanks for all the info about the 318 and Magnum. I looked up the VIN just to make sure the car is originally equipped with the 273. I don't know how I did miss that even I am always trying to restore my Belvedere to the stock configurations. The car is not originally equipped with 273, it...
  5. Hamid

    Chrysler 8 3/4 Axle bearing and Seal R&R...A How To

    Sorry didn't post my update soon, but I end up with changing the axle housing, I got it from a 66 Belvedere wagon, as my axle housing is over sized / scored badly earlier. Put new seals, installed everything back and it is not leaking anymore.
  6. Hamid

    273 swap

    Thank you for all your advises. That is encouraging the 318 don't drink a lot of gas beside the extra HP over the 273.
  7. Hamid

    273 swap

    Dear all: I have a 66 Plymouth Belvedere, 4 Dr sedan with 273 original. Is the 318 a good swap, what is the pros and cons. I see the 273 is less fuel consumption. I appreciate all your comments.
  8. 66 Belvedere II

    66 Belvedere II

    Bought it 12 Mar 2017 from a guy in Knoxville, Tenn. The car was shipped to my home in Jeddah, Saudi Arabia. It starts and drives very good, exterior in a good shape with all trims intact. Engine is V8-273 need rings and valve job, interior is original, needs refurbishment, new paint. Three...
  9. Hamid

    Axle leaking

    Well, I did not install the 3.55 as I wanted everything original. filled the axle with oil till it spilled out of the filling hole. Drove the car for 83 miles, no leaks or oil dripping, I appreciate sharing your ideas in my thread. One thing I missed to mention in post #44 that the problem of...
  10. Hamid

    Axle seal issues

    I used the old 2.94 carrier, as I want everything original, just replace the banjo axle housing off of 66 Belvedere S.W, drove about 83 miles, no leaks or signs of oil drops.
  11. Hamid

    Axle leaking

    Finally I removed my father's 66 SW rear differential, it was the same P/N 2070741 and all the measurements were the same. The only difference is the ratio 3.55, mine is 2.94. I don't know what effects does the 3.55 axle has on driving over the 2.94?, looks interchangeable though. Wish someone...
  12. Hamid

    Axle seal issues

    Would that affect mileage?.
  13. Hamid

    All Matching Numbers (AMN) 63 belvedere 4dr

    Things were changed now, the old axle found to be oversized somehow, it is not any good, I brought one from my father's 66 SW, the same everything except the ratio 3.55. Mine is 2.94, I don't know what the ratio will have an affect on driving, should I use it or replace it with the original...
  14. Hamid

    Axle seal issues

    Finally I removed my father's 66 SW rear differential, it was the same P/N 2070741 and all the measurements were the same. The only difference is the ratio 3.55, mine is 2.94. I don't what effects does the 3.55 axle has on driving over the 2.94?, looks interchangeable though. Wish someone shed...
  15. Hamid

    Axle seal issues

    I sure will, thank you for the reminder.
  16. Hamid

    Axle seal issues

    Yes, that is a shop tools, not for one like me he only needs it once. it is a critical job though. My father have a 66, 67 Belvedere wagons abandoned in our home town about 245 miles from where I live. I will make a trip soon and see if they are the same type. Got to go and see what...
  17. Hamid

    Axle seal issues

    The ends are pretty quick solution, but does it need cutting?, how it is installed?
  18. Hamid

    All Matching Numbers (AMN) 63 belvedere 4dr

    Make sure you apply a coat of red or black sealant on the tube side of the tank, and once more after installation pass a bead of sealant with your finger around the grommet where the tube and grommet mates.
  19. Hamid

    Axle seal issues

    What do you mean by the ends?
Back
Top