Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Very nice condition. Factory issue on HP big-block with axle package cars (3.55,3.91,4.10 ratios). Perfect finishing touch to your car. Bottom fin is a little loose. $375 shipped to lower 48 from 16602
Does anyone happen to have either a thumb-wheel (second one in on left) or the small plastic gear for the indicator wheel? I bought a radio that is completely missing the tuning gear on the wheel. Thanks
What you see is what you get. It’s in rough shape but better than nothing if you need one. OEM 1970 ONLY console handle w/ slip in bayonet style for the purists- repops are bolt on. Asking 150 + shipping from 16602
8 3/4” center section- OEM 3.23 ratio. 489 case, cone type sure grip, small yoke. Spins easily- appears to be in good shape. Can deliver to Carlisle with prearrangement or pick up in PA- 16601. Asking 750
8 3/4” 3rd member: 489 case 3.23 ratio with cone type sure grip and small yoke. It spins smoothly- but I have not run it personally so selling AS-IS. Can deliver to Carlisle with prepayment or local pick up from 16602. No shipping at this time. $750
Also have a 3.55 489/cone/large yoke I could...
What I believe to be an OEM hood latch set up for a 1966-67 Coronet. (If I am wrong PLEASE correct me.) Includes what you see pictures. Primary latch mechanism works well however the secondary hood latch has a broken spring. I have not tried to clean it up beyond wiping off the pieces. Asking...
Parts lot as pictured. A few pieces are NIB Year One. Includes some radio knobs and dash/heater switches- none have been tested. Please make sure of the applications before buying. I am not an expert in this area. Sold AS-IS. $70 shipped within lower 48.
Set of used OEM four speed pedals for 1971-up B-body and 70-74 E-body. What you see in the pics is what you get. Someone cut the original pedal housing and trashed it hence the disassembly. You will need to get a new bearing/bushing kit. $200 shipped to lower 48.
OEM set of 1968-69 Factory 383/440 HP exhaust manifolds. Appear to be in great shape with no cracks or repairs evident. Heat riser turns freely. Part numbers in pics- can’t determine casting dates. Asking $425 plus shipping from Pa. (Venmo, Check or M/O) Possible delivery to Chrysler’s at...
New reproduction (possibly Classic industries?) Mopar 340/440 Six pack idle solenoid. I have not tested it so I’m selling AS-IS. Acquired it with some other parts so can’t swear to it’s history. Priced accordingly- 75 shipped within lower 48.
1970-71 Factory 383/440 HP exhaust manifolds. Appear to be in great shape as seen in the pics. Heat riser turns freely but is missing the return spring. Asking $475 plus shipping from Pa. (Venmo, Check or M/O) Possible delivery to Chrysler’s at Carlisle with prepayment. Thank you
Looking to buy drip rail trim for Driver/Passenger side. Ok if needing polished but minimal dings a must. Please PM here with price shipped to Pa- 16602. Thanks
Center section- 489 case with OEM 3.23 R/P and cone-type suregrip; new bearings, crush sleeve and seal. 7290 (large) yoke. $650 + shipping from 16602. Pick up preferred. PayPal add 3%, Venmo or Possible Friday delivery to Chrysler’s at Carlisle with prepayment.
Title says it- trying to install 4 speed console but need to know where floor brackets are located from the factory. Also need to cut out the auto console for a 4 speed as well..Does anyone have a picture or two?? Thanks!
8 3/4” 3.23 ratio, 489 case, Cone-type Sure-grip center section, small (7260) yoke. OEM ring and pinion, new bearings, seal and crush sleeve. Ready to drop in. Asking $650 + shipping from Pa 16602 (PayPal add 3%)
8 3/4” 3.23 ratio, 489 case, Cone-type Sure-grip center section, large (7290) yoke. OEM ring and pinion, new bearings, seal and crush sleeve. Ready to drop in. Asking $725 + shipping from Pa 16602 (PayPal add 3%)
Nice, lightly used adjustable pinion snubber for 8 3/4” axle. Hardly looks like it had been installed. I assume that it is a MP piece. Asking $90 shipped anywhere in the lower 48.
PayPal add 3%