• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. K

    727 Pump

    Thoughts on why my torque converter will not spin on freshly rebuilt 727? I have it fully engaged into the pump and then it refuses to turn. I rebuilt the 727 so did I set something up wrong? The center shaft spins and rotates the tail shaft but once engaged with the pump it will not rotate.
  2. K

    Stripped 727 Bolt Hole

    I have a thread stripped on my 727 where it mounts to the 440 on the lower starter side. Should be a 7/16”-14 be the threads are toast in the transmission case. This hole being all the way through the transmission case can I insert a heli coil from the back side fine? Or do I need to pull the...
  3. K

    ID Help

    Any help aiding the below car? Wondering about inquiring to purchase it and was curious what it might be worth. Interior is shot, wasn’t any deep rust, and no engine from what I could tell.
  4. K

    727 Endplay Measurement

    What is the proper way to take the endplay measurement? I keep seeing conflicting things about letting the case support itself and pulling up on the output shaft and then some say to lay it on its side and pull on the output shaft. I will say that I cannot seem to get any reading out of when it...
  5. K

    Stripped Tail Shaft Housing Thread

    So I finally got to final assembly of the 727 and as I was bolting the tail shaft housing down the last bolt just kept spinning on me. Pictures are attached. This is a hole that goes all the way through the case. What are my options? Will a helicoil work or do I need to dump this housing?
  6. K

    727 sat outside, rebuild?

    I have a 727 that was stored outside for about 6 years vertically on the side of my house. I had a bag wrapped around the tail shaft for a majority of it but it sat for some months without it. I was able to crack the pan today and water infiltrated the case. There was maybe 1/4 of a cup of...
Back
Top