Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1/16 is plenty of room. If it clears the clips for the moldings, it will work. 1/8 butyl tape using the good stuff. The front uses a gasket with butyl tape on the bottom and about 3 inches up the sides from the bottom.
“Loud and Annoying” depends on what exhaust system you are running but the whole city block (all are retired) loves the sound of the super bee with super 10’s. My old roommate had glasspacks on his truck. Those were loud and annoying:drinks:
I had the 40’s took them off and gave them to a buddy. It wasn’t aggressive enough, not sure what you are looking for, loud and sounds nice? Had glasspacks but they sounded to much like a mud truck with open headers
The sound of the stock starter is one of the coolest sounding starter of all times until you have to replace it and you have headers.... and you have bolts instead of studs for the headers:drinks:
Doing that right now in a 68 road runner with 383. Bought a starter from Napa for a 91 Dakota with 318. Same starter I used in my super bee, road runner, challenger I had and the same starter my neighbor use in 4 of his mopar muscle cars. I’ll post pictures for others to use for reference.
It...
That’s what I spray. What I have found is that you save a lot using shopline or Omni base but you will be using twice as much to get the coverage as you would get with deltron. Especially B5 blue. And because of this, I would never spray cheap base. You have to spray 5 coats of cheap base to get...
I’m gonna say try a different starter. Bought a new starter that lasted 4 months. Worked fine when I put it in, after a couple of months it would click a few times before it would actually start. 12.9 volts at battery, 12.5 at starter relay and starter. Had it tested, said it was good but I’m...
I would replace all bulbs first. Just did that in my 69 bee, the right turn indicator stopped working, half of the time it would blick slow. Found out the front turn bulb looked good on the outside but was actually junked. I bought a box of bulbs so I replaced all.