• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. ITS A 72 RR

    SOLD 72 RR GTX TRACK PAC

    Numbers matching car. Original paint Un-restored 440 HP 4 speed w/11 inch clutch Dana 60 9 3/4 3.54 NEW parts since 9/2018 Fuel Tank and Fuel Lines Fuel sending unit Fuel filler neck Fuel pump Distributor 4 Wheel power disc brakes Brake lines Edelbrock 1406 600cfm carb. Upper and lower control...
  2. ITS A 72 RR

    72 roadrunner/GTX super track pac car ??

    My Dad always told me that this was a super track pack car. 1 of 79 built in 72. How do I go verify this ? I'm thinking of selling and just want to advertise it correctly. 440 HP HEMI 4 speed w/ 11 in. clutch Dana 60 9 3/4 w/4.10 gears Fender tag info. N23 N41 N85 R11 END EV2 U 26 C12 J45...
  3. ITS A 72 RR

    Mini starter relocation terminal

    I just bought one of the mini starters for my 72 440 4 spd. I have read older post about these relocation terminals from a member Valiantone but he hasn't been on this site since May of 2018. Does anyone know of another place to find these ?
  4. ITS A 72 RR

    Dana 60 9 3/4 housing gasket

    Decided to change the fluid in the differential this morning and with very little pressure the filler plug broke. It's still in there and sealed just no way of getting it out with out removing the cover. Been looking on line and can't find a gasket and filler plug for a Dana 60 9 3/4 anywhere...
  5. ITS A 72 RR

    Reinstalling Intake Question

    The instructions that came with the new gasket pan says to put some RTV around the vacuum ports on the block side. I know it is required on the front and back of the block on the pan. But the original had no type of RTV on the vacuum ports. Any thoughts on this ? BTW it's a 72 RR GTX 440 non AC...
  6. ITS A 72 RR

    best way to remove 72 RR GTX roof stripes

    Mine are cracking and would like to order a new set. What is the best /easiest way to remove these without doing any damage.
  7. ITS A 72 RR

    Running HOT

    72 440 Holley 4bbl mech. fuel pump. 4 spd I replaced the radiator since the car sat for 24 years and it didn't look very good inside. Original shroud fits perfect with new rad. Original 7 blade fan. still moves a lot of air. New upper and lower hoses. Lower hose is the ridged flexible type since...
  8. ITS A 72 RR

    Odometer reading coincidence

    Got home from a test drive the other day and looked down at the odometer. it reads 72440.6 BTW I have a 772 440 4bbl. I should have looked when it was at 72440.4
  9. ITS A 72 RR

    SOLD FREE interior parts

    Found a box of mopar door cranks, door latches, badges and some other stuff. These are not for my car and don't know what they are for, so if anyone out there can use these let me know. It goes as 1 package and will not be separating. You just have to pay for the shipping.
  10. ITS A 72 RR

    New radiator installed ?

    72 RR 440 MT no AC. I just replaced my radiator with a 2 row aluminum from Classic Industries . I have bypassed the heater core until I get this one rebuilt or replaced. My question what is the best way to purge the system to get rid of any possible air in the system. I ran it for 20 mins. in...
  11. ITS A 72 RR

    E-90 rec fuel?

    440 4bbl manual transmission. E-90 Has anyone tried using this fuel yet ? We have it at most gas stations here in FL. But wanted to see if there might be a downside to using it. My thoughts are it has to be better than the 93 octane with "10%"ethanol .
  12. ITS A 72 RR

    new 2 post ballast question

    My question is can someone please tell me the color of the existing wire coming from the fire wall going in to the ballast resistor. Also will this be the wire that has 12v in the start position or 12v in the run position. Also what are the other wires running to the coil both + & - sides. Just...
  13. ITS A 72 RR

    Bypass Heater Core ?

    Quick question. I have a 72 RR 440 no AC car. The heater core just started leaking and reading through some old post it sounds like I can temporarily bypass the heater core. Can I just plug the output side from the block or do I have to connect the 2 hoses together to make a circulation loop...
  14. ITS A 72 RR

    E Brake cable install

    The moron tow truck driver that brought my car from VA to FL thought by cutting the e brake cable that it would free up a stuck wheel. My problem is where can I find any info on re-routing the new e brake cable.
  15. ITS A 72 RR

    Need help identifying what size rear end.

    On a 72 440 4spd 4bbl. Fender tag info. N23 N41 N85 R11 END EV2 U 26 C12 J45 M21 EV2 C2X9 TX9 504 282053 E86 D21 RM23 U2R 316877 On rear end 1st tag 46-13 3:54 2nd tag USE LIMITED SLIP DIFF LUBE ONLY I think after reading some old post that it's probably a 9 3/4 Dana 60. But would like to...
  16. ITS A 72 RR

    Power steering cooler ?

    im putting this 72 back together and noticed that there is a leak in the power steering. not sure if it's the pump or a hose yet. but my question is this . I've done a lot of searches and have not seen a picture or any write ups about a cooler on power steering. if I need to get a new or rebuild...
  17. ITS A 72 RR

    Trac-Lok vs Powr_Lok ?

    Can someone tell me the difference between these 2 diffs. I found in the trunk a N.O.S. shipped from DANA to Chrysler with a Dodge model 60 9 3/4 differential case assm. kit. PN#27168-3X But it says it's a Trac-Lok. Will it work in my RR ? I'm not a wrench by any means so any help is always...
  18. ITS A 72 RR

    FOR SALE Assorted Badges

    My Dad was a Mopar collector. I found these in the trunk of a 72 Road Runner. So they are no good to me but I'm sure someone can use them. I think they are worth a least 20.00 each. Buy 1 or all.
  19. ITS A 72 RR

    72 RR UCA ball joint removal

    having trouble getting this out of the control arm. The new one I ordered looks like it is screwed in. I went up to auto zone and borrowed the kit. They have the right socket in there. But cant get it to move. Also having trouble getting the spindle off. I tried heat and soaked everything in PB...
Back
Top