Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From my measurements, it seems my brake booster rod is too long even after adjusting the acorn but all the way in. Just got my MC back from restoration so that's good and the brake bolster was a rebuilt original as well.
The first pic is the depth of MC and the second pic is the brake booster...
Looking to buy a pair of half loop chrome trim for the rear windows where it meets the quarter panel. Below is the link of my original thread for placement where I learned I had Plymouth curl trim and not dodge. I've also added a picture of the trim to help.
If anyone is interested in a trade...
Mocking up my trim and want to make sure I get it right. I'm trying to see if anyone has any close-up shots of how the half-round window chrome trim goes on. Does it go over or under the drip rail molding? Does the vinyl top trim for the quarter mate directly up to the half-loop or is there a...
Long story but figured somebody can help.
The engine is 426 stock build minus cam. Somebody else built the short block (he passed away earlier his yr) I inspected it and it looked good so I finished the rest of the build. Primed it w/drill CCW but no oil pressure via mechanical gauge...
Wrapping up the restore on the bee and bleed the back brakes w/no issues but the front will not bleed. I'm getting fluid to the proportional valve (I can crack line and see fluid) but not thru it by evidence of no fluid in the rubber brake line when I crack that open. Every component is new...
Installed my drive shaft but for the u joint u bolts are not long enough as I barely get a nut on them. Ordered a new set from year one and they are not any longer than the stock one. Are there different sets/lengths?
This is for a 69 bee, dana 60, 4 spd car. The u joints that I have in there...
Looking for tips on the easiest way to prime a Carter carb on a hemi? I'm getting ready to fire the motor up for the first time after a rebuild. Thinking I should fill it through the vent tubes? Anybody else have easier or better way?
Before I sandblast my Sunvisor arms in preparation for paint, what color are they supposed to be? This is for a 69 bee; they look like a dull silver but wanted to check in and see if anyone knows. TIA
I'm at a loss on where to find the rubber boot that sits on the inside of the ramcharger/air grabber ducting that allows the booster to sit inside. I know it is a Hemi specific thing but can't find it anywhere. Any tips on where to find one or know a vendor....thanks.
Having an issue getting oil on the driver's side head. Primed the engine with a big drill CCW and rotated the engine two full revolutions and the driver's side is bone dry.
Loosened the four corner rocker stand bolts in hopes it would help get some flow but no dice. Anybody else experiences...
Getting ready to install a dash in the bee. Wanted to apply some lessons learned from the folks who have done it before.
Anything i can do to make it a better and more efficient install? What are the dos and do nots etc..appreciate the help. The dash has been completely rebuilt by Instrument...
Getting ready to have a vinyl top put on the bee and I'm curious how the quarter panel trim installs. I had new quarters put on the car so the original holes are long gone.
How do I ensure I get the 3 holes drilled correctly? How does the trim pop in the hole. Cant be just bare ornithologists...
Orginal bucket seats that have been reupholstered with new black covers and seat backs. Seats will work for alot of older Mopars but are correct for 67,68 and very early build 69s. If I'm wrong please let me know No longer need as I'm moving to a bench seat. Driver side seat has a very small...
Up for sale is a 18268 Bendix OEM 1970 E Body Power Disc Brake Booster. This item is correct for a 1970 Ebody but may fit other applications.
Part number and penstar is stamped on the booster. It was rebuilt but it has sit on a shelf since 2011. $110 OBO +ride
11" 426 hemi bell housing used for 1968-1969 Mopar B-bodies. Item has been sandblasted and painted with 3 coats of mopar hemi orange paint. All holes and threads are in excellent shape. There was a repair done by a prior owner. The 3-4" C around starter has been cut and removed. Looks like it...
Looking for a reputable shop to install a vinyal top on my 69 superbee. I live in Panama City, FL and cant find anyone who will do these that, one I trust, two has the skill and three has done them on an old car. Any body have some recommendations?
Getting ready to restore the dana in the superbee and want to make sure I have it the right color. I believe the axle is gloss black but what about the leaf spring forward perch/box. Is it black as well or just gray?
Car was purchased 20 years ago in Huntsville AL. Y2, vinyal top, hemi 4 speed. Originally a lynch road car, no build sheet any information would be awesome. WM23J9A219658. I'm restoring it and trying to find the history as the orginal driveline is gone and was replaced with a 67 hemi and trans.